Hummer H2 Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(145)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(145)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Hummer H2 Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Hummer H2V8-6.0LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2009 Hummer H2V8-6.2LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Hummer H2V8-6.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Hummer H2V8-6.2LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2005 Hummer H2V8-6.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2007 Hummer H2V8-6.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Hummer H2V8-6.0LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
Show example Hummer H2 Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hummer mechanics

Real customer reviews from Hummer owners like you.

Excellent Rating

(145)

Rating Summary
137
6
0
0
2
137
6
0
0
2

Graham

17 years of experience
137 reviews
Graham
17 years of experience
Hummer H2 V8-6.0L - Alternator - Ingleside, Illinois
Very courteous and excellent work!

Kyle

12 years of experience
95 reviews
Kyle
12 years of experience
Hummer H2 V8-6.0L - Evaporative Emission Control Canister Replacement - Dayton, Ohio
Fast and professional service. Kyle was not only professional, but was very personable and answered all my concerns. The service was performed without a hiccup.

Christopher

25 years of experience
80 reviews
Christopher
25 years of experience
Hummer H2 V8-6.0L - Automatic Transmission Fluid Service - Slidell, Louisiana
I would request Chris for all my needed services in the future, he is committed to providing the end customer quality work at a fair price.

Paul

23 years of experience
329 reviews
Paul
23 years of experience
Hummer H2 V8-6.0L - Pre-purchase Car Inspection - Tampa, Florida
Seemed to give me good advice on the pre-purchase inspection. Food many issues that could have ended up costing me a lot of $$$ after the purchase. Not going to buy this truck based on Paul's recommendation.

Excellent Rating

(145)

Rating Summary
137
6
0
0
2
137
6
0
0
2
Number of Hummer H2 services completed
1595+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hummer MECHANICS
200+
experts on our platform

Recent articles & questions

P0213 OBD-II Trouble Code: Cold Start Injector 1 Malfunction
P0213 P0213 code definition Cold Start Injector 1 Malfunction What the P0213 code means P0213 is an OBD-II diagnostic trouble code that is set when the Engine Control Module (ECM) detects an issue with the cold start number 1 fuel...
Rules of the Road For South Dakota Drivers
South South Dakota’s state motto is “Great Faces, Great Places,” so you know you’ll want to do some driving when you visit or move here. Of course, if you’re going to spend any time behind the wheel, you’ll want to...
How to Replace a Steering Rack Bushing
You'll know when steering rack bushings are faulty when steering feels loose or bumpy, or if you hear a noise like something is falling off the car.

Speedometer broke.

Hello, to check the operation of the speedometer, a scan tool needs to be connected to monitor the speed sensor output and see if it has any output, and if it is smooth. You will probably need the aid of...

Engine making high-pitched noise

Hi, this typically points to an issue with one of your serpentine belts. These belts drive different components on the vehicle such as the water pump, alternator, and A/C compressor. Over time, they will begin to lose their grip which...

Getting error code p0340 on my 2002 Ford Taurus DOHC 3.0

Hi - yes, you are correct. This error code (P0340 (https://www.yourmechanic.com/article/p0340-obd-ii-trouble-code-camshaft-position-sensor-circuit-malfunction-by-jamahl-walker)) means either the sensor, or the wiring and connectors for this sensor, are malfunctioning. Check the wiring connection for the sensor first, but most likely, the sensor has failed....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com