Hummer H2 Exhaust Manifold Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(139)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(139)

Exhaust Manifold Gasket Replacement Service

How much does a Exhaust Manifold Gasket Replacement cost?

On average, the cost for a Hummer H2 Exhaust Manifold Gasket Replacement is $313 with $47 for parts and $266 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Hummer H2V8-6.0LService typeExhaust Manifold Gasket ReplacementEstimate$423.79Shop/Dealer Price$477.25 - $574.62
2003 Hummer H2V8-6.0LService typeExhaust Manifold Gasket ReplacementEstimate$510.28Shop/Dealer Price$578.81 - $687.49
2008 Hummer H2V8-6.2LService typeExhaust Manifold Gasket ReplacementEstimate$366.65Shop/Dealer Price$419.87 - $516.42
2006 Hummer H2V8-6.0LService typeExhaust Manifold Gasket ReplacementEstimate$367.79Shop/Dealer Price$421.23 - $518.59
2007 Hummer H2V8-6.0LService typeExhaust Manifold Gasket ReplacementEstimate$367.79Shop/Dealer Price$421.34 - $518.78
2009 Hummer H2V8-6.2LService typeExhaust Manifold Gasket ReplacementEstimate$366.65Shop/Dealer Price$419.87 - $516.42
2005 Hummer H2V8-6.0LService typeExhaust Manifold Gasket ReplacementEstimate$374.69Shop/Dealer Price$426.04 - $517.83
Show example Hummer H2 Exhaust Manifold Gasket Replacement prices

What is the Exhaust Manifold Gasket all about?

Depending on your engine and type of vehicle, the exhaust manifold can either be a set of pipes or it can be a cast iron manifold assembly. Essentially the exhaust manifold takes the burned exhaust gases from the engine’s cylinders and ejects the gas through the exhaust system and out through the car's tail pipe. The exhaust manifold gasket seals the surface of the exhaust manifold to the surface of the cylinder head, preventing leaks in the system. Over time, the constant expansion and contraction of the components (caused by constant heating and cooling in the engine), may cause the gasket to leak. These leaks can be hazardous as hot exhaust gases escape and can damage other components in the engine compartment. A leaky exhaust manifold gasket can also impact engine performance.

Keep in mind:

Sometimes an exhaust manifold starts to leak because a mounting bolt has broken. If this happens, the mechanic will have to remove the broken bolt or stud, which can increase the labor time needed to fix the problem. Your mechanic may charge you an additional fee, depending on the severity of the situation.

How it's done:

  • Inspect exhaust system for leaks.
  • Determine if it is the manifold or flange gasket that is leaking.
  • Remove and replace faulty gasket.
  • Apply anti-seize to the threads of the bolts.
  • Install new exhaust manifold gasket.
  • Start car and check for any exhaust leaks.

Our recommendation:

The exhaust manifold gasket helps in transferring burned gasses from the engine. It is located in a high temperature zone, and it will leak eventually. There is no way to prevent it. Your mechanic should use anti-seize compound on the bolts when they are replacing this part. This will help prevent bolts from breaking in the cylinder head.

What common symptoms indicate you may need to replace the Exhaust Manifold Gasket?

  • Loud noise from engine.
  • Lack of engine performance.
  • Check engine light is on.
  • Smells from the engine compartment (eg. plastic components next to exhaust manifold melting from escaped heat).

How important is this service?

A leaky exhaust manifold is a health and safety concern. Hot exhaust gases escaping from the engine can be a fire hazard melting nearby plastic components in the engine compartment.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hummer mechanics

Real customer reviews from Hummer owners like you.

Excellent Rating

(139)

Rating Summary
132
5
0
0
2
132
5
0
0
2

Robert

20 years of experience
1092 reviews
Robert
20 years of experience
Hummer H2 V8-6.0L - Starter - Denver, Colorado
Robert is amazing. Super knowledgeable and easy to work with and very honest. Im going to keep him busy with all my vehicles that always need something fixed on them. Lol

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Hummer H2 V8-6.0L - Spark Plugs - Buckeye, Arizona
Like always did a great job and completely the tune up quicker than the time allowed

Luke

16 years of experience
138 reviews
Luke
16 years of experience
Hummer H2 V8-6.0L - Heater Blower Motor - Saint Peters, Missouri
On time, good work! Would use service again.

Ruben

23 years of experience
116 reviews
Ruben
23 years of experience
Hummer H2 V8-6.0L - Oil Change - San Jose, California
Excellent Customer Service

Excellent Rating

(139)

Rating Summary
132
5
0
0
2
132
5
0
0
2
Number of Hummer H2 services completed
1529+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hummer MECHANICS
200+
experts on our platform

Recent articles & questions

P0177 OBD-II Trouble Code: Fuel Composition Sensor Circuit Range/Performance
P0177 P0177 code definition Fuel Composition Sensor Circuit Range/Performance What the P0177 code means P0177 is a generic OBD-II code indicating that the diesel fuel sensor has detected water in the fuel filter, or the fuel composition sensor is out...
Windshield Laws in Montana
Montana Montana drivers know they are required to follow the traffic laws in order to drive safely and legally on the roadways. However, vehicle safety requirements also include strict regulations on the windshields of all automobiles driven on the roadways....
B2107 OBD-II Trouble Code: Front Wiper Motor Relay Circuit Short to Vbatt
B2107 trouble code means there's a circuit error in the front wiper motor relay, caused by a damaged relay, or damaged electrical components.

The car starts only with Easy Spray

Hi there. Thanks for writing in about your 2010 Ford Transit Connect. It sounds like there may not be a crank signal occurring at the normal cranking speed. If there is not, then the engine will not start. If adding...

Cam shaft position sensor

Hi there. The camshaft position sensors (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) are located on the front of your engine on the top under the engine cover. I usually do a complete inspection before replacing these because there are a number of reasons as to...

What are the signs of a misfiring engine? I'm not sure if my car is misfiring or something else.

Misfire can be a very broad term that can describe a variety of symptoms, but as far as the Engine controller is concerned, a misfire occurs when combustion is not taking place when the controller is expecting it. The Controller...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com