Honda Passport Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(41)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(41)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Honda Passport Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Honda PassportV6-3.5LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2020 Honda PassportV6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1996 Honda PassportV6-3.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Honda PassportV6-3.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1998 Honda PassportV6-3.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2001 Honda PassportV6-3.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1994 Honda PassportL4-2.6LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1996 Honda PassportL4-2.6LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Honda Passport Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(41)

Rating Summary
38
2
0
0
1
38
2
0
0
1

Jonathan

22 years of experience
304 reviews
Jonathan
22 years of experience
Honda Passport V6-3.2L - Car is overheating - Denver, Colorado
Jonathan was wonderful - prompt, thorough, personable, so knowledgeable, and quick!

Stephen

12 years of experience
36 reviews
Stephen
12 years of experience
Honda Passport V6-3.2L - Radiator - Bonita, California
very relaxed

Jason

32 years of experience
518 reviews
Jason
32 years of experience
Honda Passport V6-3.2L - Starter - Glendale, Arizona
Really really he is a good & friendly Macanic

Marques

20 years of experience
12 reviews
Marques
20 years of experience
Honda Passport V6-3.2L - Battery will not hold a charge - Kent, Washington
He gave excellent service, with helping me figure out why my car wouldn't hold a charge.

Excellent Rating

(41)

Rating Summary
38
2
0
0
1
38
2
0
0
1
Number of Honda Passport services completed
451+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Transmission Oil Pressure Switch
Common signs include the vehicle entering "limp" mode, having difficulty shifting, and its engine RPM being higher than it should be.
How to Register a Car in Virginia
There There are so many different things that have to be handled when moving to Virginia. Making sure that you take the steps needed to get a car registered in this state should be at the top of your list...
How to Use a Pool Noodle to Keep Your Car From Getting Scratched
If If you have ever swung open a car door and accidentally hit a garage wall, you know how simple it is to scratch (https://www.yourmechanic.com/article/how-to-repair-scratches-on-a-car) or dent (https://www.yourmechanic.com/article/how-to-fix-car-dents-by-brady-klopfer) your vehicle. It is difficult, however, to always be mindful of opening...

Rough idle, possible misfire, bad oxygen sensor a possible cause

There are a number of things that can cause a misfire to be present, but a failing oxygen sensor is certainly one of them. As you know the oxygen sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement) reads the exhaust gases and relays this information to...

2008 Buick Enclave engine light on with code p1682 and car stays running with key off for while then dies, ECM is humming,

Code P1682 sets if the ECM detects a difference in the voltage levels of the two main power inputs to the ECM. Basically, the code will be stored when one voltage input has a significantly different value than the other...

Cam sensor problem on my 2014 Chevrolet Camaro

Hello. This can be caused by a number of issues. If the sensor clearance is not correct then this will occur. I would check this first. I would then monitor the sensor signals as that would tell me if the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com