GMC Yukon Tighten Wheel Lug Nuts at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(483)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(483)

Tighten Wheel Lug Nuts Service

How much does a Tighten Wheel Lug Nuts cost?

On average, the cost for a GMC Yukon Tighten Wheel Lug Nuts is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 GMC YukonV8-6.0LService typeTighten Wheel Lug NutsEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1997 GMC YukonV8-5.7LService typeTighten Wheel Lug NutsEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 GMC YukonV8-6.2LService typeTighten Wheel Lug NutsEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 GMC YukonV8-5.3LService typeTighten Wheel Lug NutsEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1994 GMC YukonV8-5.7LService typeTighten Wheel Lug NutsEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2008 GMC YukonV8-6.2LService typeTighten Wheel Lug NutsEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 GMC YukonV8-5.7LService typeTighten Wheel Lug NutsEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2021 GMC YukonV8-5.3LService typeTighten Wheel Lug NutsEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC Yukon Tighten Wheel Lug Nuts prices

What is tightening the wheel lug nuts all about?

Whenever a car’s wheel has been taken off, it should be replaced and the lug nuts properly tightened. By properly, we mean with a torque wrench that tightens the nuts to the manufacturer’s specification. Many workshops simply use air wrenches that frequently over tighten the lug nuts. This is potentially dangerous and destructive, because it can damage the wheel, stud and lug nut, as well as warp the disc brake rotor.

Keep in mind:

  • Every car has a recommended torque figure for the lug nuts.
  • There is a sequence best followed for tightening the lug nuts.
  • Any kind of grease or anti-seize compound should not be applied to the threads
  • Even without a wheel removal, it’s advisable to check the lug nuts from time to time.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The wheels are installed and the lug nut installed by hand then only tightened enough to hold the wheel snugly
  • The vehicle is lowered off of the jack stands till the wheel just touches the ground and torque the lug nuts to specifications in a star pattern
  • The vehicle completely lowered to the ground and completed till all wheels are done

Our recommendation:

Have your wheels checked at every routine maintenance service, and ask the mechanic to make sure the correct torque levels are being observed.

What is a common symptom indicating you need to tighten the wheel lug nuts?

  • Clunking or rattling sound from the wheels.

How important is this service?

Since there is a danger of wheels coming off or of damage being done to the wheels or their attachment studs, you need to be sure that the correct procedure for tightening the wheel lug nuts has been followed for your vehicle. If there's any doubt, get an inspection from one of our expert mechanics as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(483)

Rating Summary
460
11
3
1
8
460
11
3
1
8

Deane

11 years of experience
340 reviews
Deane
11 years of experience
GMC Yukon V8-5.3L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Oceanside, California
Deans was great, he arrived early and completed both repairs in a reasonable time. He was knowledgeable and friendly. I will definitely ask for Deane in the future.

Eduardo

19 years of experience
552 reviews
Eduardo
19 years of experience
GMC Yukon V8-5.3L - Electric Problems - Houston, Texas
Inspection and Diagnostic Was 100% wrong. On all parts. Problem: All Rear lights flickering Inspection: Diagnostic: Turn signal, tail lights bad connections Repair Signal and connections recommendations: Remove and Replace Multi functional turn signal switch. also has bad connection between turn signal and tail lights. Replace Rear lamp harness connectors. L&R side. All diagnostic and recommendations Was accurately completed. That cost my son, greatly in unnecessary repair cost. That didn't fix the problem or anything else. and didn't need to be replaced or fixed, still had power to the replaced parts and in good working order. Following the recommended repairs ended up adding additional problems, truck remote and driverside door. Has lost all control functions and alarm has to be set manually and individually. False warning lights and codes popping up. Preventing from addressing real problem, until to late and check engine pressure light comes on and knocking noise from engine appears, after addressing and clearing of warning lights and codes. That had already been fixed or was a wrong random code that needed no action to be taken. I asked a repair forum and explained in detail. And Jacob recommended I start from troubleshooting from the simplest solution and make my way up if necessary. First obviously, check the brake lamp bulbs are correct and there was power to the build and sockets. Check. Next make sure the ground connection by the rear hitch wasn't broken or damaged while the brake light bulbs was being removed and replaced. And we have a winner. The ground connection. Fixed all rear lights. They're working normal again. A $0 fix cost my son over $800 in parts and labor fees. And now a motor. New Battery, New O2 sensors up/ down replaced, ignition coils and wires replaced, spark plugs, oil change, oil gasket replacement, filters. Valve Cover Gasket replaced. No leaks anywhere. Replaced the recommended, set off false codes. After getting it reset. Check oil pressure light comes on and knocking noises occur. Next day motor is needed. All could had been prevented if the obvious connection test was performed. I would recommend yourmechanic.com. I have a appt scheduled. Pay attention to the mechanic. Cost my self paying college son a vehicle.

Kenneth

20 years of experience
781 reviews
Kenneth
20 years of experience
GMC Yukon V8-5.7L - Brake Light Switch - Whittier, California
will absolutely use this service again

David

16 years of experience
636 reviews
David
16 years of experience
GMC Yukon V8-5.3L - Check Engine Light is on - Antelope, California
DAVID DID A GREAT JOB!!!! NOT ONLY DID HE KNOW HIS SKILL TO THE HIGHEST LEVEL HE ENSURED THAT HE SHOWED ME AND EXPLAINED WHAT NEEDED TO BE DONE AND WAS PATIENT WHEN ANSWERING MY QUESTIONS!!!! HE WAS ALSO VERY VERY POLITE AND THATS WHY ANY FUTURE MAINTAINCE I NEED "I WILL BE REQUESTING MR. DAVID OLOYEDE!!!!" THANK YOU AGAIN!!!! YOUR CUSTOMER JEFFREY WITCHER!!!!

Excellent Rating

(483)

Rating Summary
460
11
3
1
8
460
11
3
1
8
Number of GMC Yukon services completed
5313+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How Long Does a Throttle Kicker Actuator Last?
What What happens when you turn down things in your vehicle such as the air conditioner? It slows down in a controlled manner. Just like when you decrease your speed it's not a sudden loss of power rather it is...
How Do I Prepare My Car for Winter?
Your Your car needs special care and attention during the cold months. To keep it running smoothly, follow these steps: Change your oil and oil filter regularly: Make sure you follow the recommendations as specified in your manual. You might...
Cell Phones and Texting: Distracted Driving Laws in Virginia
Distracted Distracted driving in Virginia is defined as anything that takes your mind and/or eyes off the road while operating a motor vehicle. In Virginia, eight out 10 traffic accidents are related to a driver being distracted. If a driver...

I have a 2016 Ram 1500. The front door creeks a bit when its cold. Is this normal?

Hi there. If you hear creaking as you open and close your doors and the vehicle is about a year old, that is actually rather normal. The doors have joints and hinges that secure the door to the body of...

output shaft speed sensor

Hi Brandon. Thanks for the question today. You can see the location of this output shaft speed sensor in this video (https://www.youtube.com/watch?v=vabHguxGCxg). Essentially, it's on the outside of the front differential on the driver side.

Oil temp sensor

Interpreting OBD codes is not always a case if replacing the part mentioned in the code. In most cases the code will indicate a circuit (in this case oil temp sensor circuit) and a voltage (voltage high or voltage low)....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com