GMC Yukon XL 2500 Clunking or knocking noise from wheels Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Clunking or knocking noise from wheels Inspection Service

How much does a Clunking or knocking noise from wheels Inspection cost?

On average, the cost for a GMC Yukon XL 2500 Clunking or knocking noise from wheels Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 GMC Yukon XL 2500V8-6.0LService typeClunking or knocking noise from wheels InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
2001 GMC Yukon XL 2500V8-8.1LService typeClunking or knocking noise from wheels InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
2012 GMC Yukon XL 2500V8-6.0LService typeClunking or knocking noise from wheels InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
2009 GMC Yukon XL 2500V8-6.0LService typeClunking or knocking noise from wheels InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
2005 GMC Yukon XL 2500V8-6.0LService typeClunking or knocking noise from wheels InspectionEstimate$104.99Shop/Dealer Price$113.42 - $119.75
2006 GMC Yukon XL 2500V8-6.0LService typeClunking or knocking noise from wheels InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
2002 GMC Yukon XL 2500V8-6.0LService typeClunking or knocking noise from wheels InspectionEstimate$124.99Shop/Dealer Price$130.87 - $135.28
2013 GMC Yukon XL 2500V8-6.0LService typeClunking or knocking noise from wheels InspectionEstimate$124.99Shop/Dealer Price$131.24 - $135.94
Show example GMC Yukon XL 2500 Clunking or knocking noise from wheels Inspection prices

Clunking or knocking noises can be very disconcerting for any driver to hear while they are going down the road. While these noises may be a symptom of some different issues, all are usually related to a suspension component that has failed. When a suspension component has failed, the ride or the vehicle may be altered. If the failed component is not dealt with, it can lead to increasingly difficult and dangerous problems.

How this system works:

Your vehicle’s suspension system is designed to minimize friction between the tires and the road, ensuring a comfortable ride for you and your passengers. Many of the components that may cause a clunking or knocking noise are not only a part of the suspension, but help control the steering of the vehicle. Any issues regarding the steering or suspension of the vehicle should be looked at by a mechanic as they will only become worse over time.

Common reasons for this to happen:

  • Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. If a ball joint is beginning to fail, you may notice a clunking noise coming from the front wheels. This clunking noise will become louder and more frequent over time. You may also notice that your steering has been affected by the bad ball joint, potentially causing vibration in the steering wheel.

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Bad Tie Rods: Tie rods connect a vehicle’s steering rack to the steering arm. This helps translate the turning of the steering wheel to the direction of the tires. When a tie rod end is worn or loose, they may produce a clunking noise. Worn tie rod ends may also cause more play in the steering wheel, making turning more vague.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the clunking or knocking noise from the wheels. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

Telling a mechanic about any unusual sensations, in addition to the clunking or knocking noise, you may have observed, will help him or her understand what went wrong with the vehicle.

The mechanic will begin by lifting the front of the vehicle off the ground and shaking the front tires to check for play. If there is play in the front tires, the mechanic will suspect bad ball joints. The mechanic will then remove the wheel and the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

If the mechanic suspects that the sway bar has gone bad, the mechanic will begin by examining the sway bar bushings. If the entire sway bar appears to be in tact the bushing may cause the clunking noise. The mechanic will then replace the bushings and the sway bar if necessary.

If the mechanic suspects the tie rods, he or she will examine the tie rods for damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

In all repairs, the mechanic will make sure after completing the necessary repairs that the car handles properly. He or she should ask to test drive the vehicle to ensure this.

How important is this service?

Suspension and steering components that have gone bad will only get worse over time. If you notice that your car is not handling well or that it has started producing a clunking or knocking noise, you should have it inspected by a mechanic. Issues with suspension and steering components could also lead to other issues, like prematurely worn tires. Being vigilant about repairs to these components can help ensure long-life for your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Chris

18 years of experience
502 reviews
Chris
18 years of experience
GMC Yukon XL 2500 V8-6.0L - Pre-purchase Car Inspection - Houston, Texas
Great communication, on time, work as described.

Jason

11 years of experience
97 reviews
Jason
11 years of experience
GMC Yukon XL 2500 V8-8.1L - AC Compressor - Scottsdale, Arizona
Great work. Very professional and courteous. Will definitely use again.

Jose

37 years of experience
21 reviews
Jose
37 years of experience
GMC Yukon XL 2500 V8-6.0L - Lights (Headlamps/beams/brakes) - Winter Garden, Florida
Jose was early which is very much appreciated. He is very friendly, but also professional. I had repaired the car myself, but was missing something in my work. Jose diagnosed it immediately upon arriving. It was such a little thing that I felt embarrassed. Jose is amazing and honest. What a rarity these days. In the future when I can't fix a problem on our vehicles, I'll be calling Jose to take care of us. Thanks Jose, I wish I'd booked you earlier!

David

16 years of experience
637 reviews
David
16 years of experience
GMC Yukon XL 2500 V8-6.0L - AC Belt - Concord, California
He diagnosed the problem with my ac and fixed only what needed to be fixed.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of GMC Yukon XL 2500 services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

What Are the Benefits of an Aftermarket Exhaust System?
All All cars must have an exhaust system in order to vent gases from the engine. However, your car’s stock exhaust system probably isn’t all it could be. Automakers are required to make a number of trade-offs to ensure that...
A Buyer’s Guide to the 2013 Chevrolet Spark
The The Chevy Spark nimbly walks the line between being functional and being totally adorable. In the spirit of mini cars past like the Ford Festiva and the Yugo, this spritely little creation offers improved safety combined with the tech...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in California
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in California through state-administered training.

front end vibrates when in park and at stop lights

Hello there, many faults will cause your 2008 Mazda 3 to have a vibration at idle. The most common would be a misfire condition, fuel pump, vacuum leak, oxygen sensor, mass air flow sensor, or a coil. A qualified Technician...

Car won't shift into park

Hi and thanks for contacting YourMechanic. Check your fuse first, under hood fuse box. Check down by your brake pedal to see if the brake/transmission shift interlock (BTSI) or brake light switch is plugged in and making contact with the...

2002 Pontiac Grand Am GT security light on constantly and the car will only start after battery is run down and jumped.

Hello, thank you for writing in. You should start by scanning the vehicle for diagnostic codes to see what the security light is trying to tell you. Do this after you can get it to start and can take it...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com