GMC V3500 Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(3,013)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(3,013)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a GMC V3500 Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 GMC V3500V8-7.4LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 GMC V3500V8-7.4LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 GMC V3500V8-6.2L DieselService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 GMC V3500V8-6.2L DieselService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1987 GMC V3500V8-5.7LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1988 GMC V3500V8-5.7LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 GMC V3500V8-7.4LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1987 GMC V3500V8-7.4LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC V3500 Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(3,013)

Rating Summary
2,853
79
21
10
50
2,853
79
21
10
50

Eliud

23 years of experience
222 reviews
Eliud
23 years of experience
GMC Savana 1500 V8-5.7L - Car is not starting - Lawrenceville, Georgia
Great

Stacy

24 years of experience
366 reviews
Stacy
24 years of experience
GMC Acadia V6-3.6L - Alternator - Lithonia, Georgia
Stacy did an amazing job on my truck very acknowledge about what was going on with my vehicle and was able to fix it with no issues very helpful with helping us understand the problem and what we need to do if anything else was to come about.

Jason

20 years of experience
26 reviews
Jason
20 years of experience
GMC Sonoma V6-4.3L - Power Steering Pump Replacement - Atlanta, Georgia
Great

John

27 years of experience
1057 reviews
John
27 years of experience
GMC Sonoma L4-2.2L - Spark Plugs - Galveston, Texas
Excellent service and prompt. Nice dude as well. Didn't seem like a mechanic, if you know what I mean. Knowledgeable but not pushy.

Excellent Rating

(3,013)

Rating Summary
2,853
79
21
10
50
2,853
79
21
10
50
Number of GMC services completed
33143+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P0418 OBD-II Trouble Code: Secondary Air Injection System Relay A circuit Malfunction
P0418 indicates that a problem has occurred in the secondary air injection system which causes engine hesitation when accelerating and stalling.
B1918 OBD-II Trouble Code: Air Bag Memory Clear Circuit Open
B1918 means the air bag memory clear circuit is open and faulty, likely due to a defective wire, instrument cluster, or air bag control module.
How to Replace a Windshield Washer Reservoir
Car windshield washer reservoirs hold washer fluid for cleaning the windshield. If the reservoir is dry it can crack or break and need to be replaced.

I moved my truck and it started fine. Went to get back in it and it wouldn't start just a faint single click.

You may have a problem in your wires somewhere. If you have a wire short it could possibly cause this. However, you may have a faulty part. Look for wires around your starter that may be touching the frame. Is...

interchangeable parts mazda 3 hatchback ,mazda 3 sedan

Based on data at Car-Part.com (http://www.car-part.com), the windows you refer to appear to interchange and, as well, many of the model years interchange, thus giving you lots of choices if you are looking for a used windshield. If you perform...

Check engine light on. Code read as p0420. Bank 1 below threshold for predetermined amount of time. What 02 sensor up or lower?

Hi there. When the oxygen sensors have readings that are similar to each other, it is an indication that the catalytic converter is not working as intended. If the voltage of the downstream oxygen sensor decreases, and begins to fluctuate...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com