GMC Sierra 3500 Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(8)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(8)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a GMC Sierra 3500 Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 GMC Sierra 3500V8-6.6L Turbo DieselService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2004 GMC Sierra 3500V8-6.0LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 GMC Sierra 3500V8-6.6L Turbo DieselService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2002 GMC Sierra 3500V8-6.0LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2005 GMC Sierra 3500V8-6.6L Turbo DieselService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2004 GMC Sierra 3500V8-6.6L Turbo DieselService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 GMC Sierra 3500V8-8.1LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2003 GMC Sierra 3500V8-6.0LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC Sierra 3500 Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(8)

Rating Summary
7
1
0
0
0
7
1
0
0
0

Robert

42 years of experience
232 reviews
Robert
42 years of experience
GMC Sierra 3500 V8-8.1L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Houston, Texas
Best I have had yet with My Machanic

Peter

28 years of experience
534 reviews
Peter
28 years of experience
GMC Sierra 3500 V8-8.1L - Check Engine Light is on - Sylmar, California
I will definitely be requesting Peter for future work. He was very knowledgeable and explained things thoroughly. Thank you!

Cesar

9 years of experience
292 reviews
Cesar
9 years of experience
GMC Sierra 1500 V8-5.3L - Car starts and then dies - Everett, Washington
Very knowledgeable, friendly and helpful.

Brandon

15 years of experience
9 reviews
Brandon
15 years of experience
GMC Jimmy V6-4.3L - Car starts and then dies - Louisville, Kentucky
Overall I had a good experience with Brandon as My Mechanic. I used this service to diagnose a problem with my 2000 GMC Jimmy in which Brandon ended up diagnosing the problem as a bad fuel pump. Unfortunately, replacing a fuel pump isn't a repair he offered on site which was one major downside and flaw with this service. I think Your Mechanic has a great idea to have the mechanic come to you and is why I went this route to begin with, but when your repair isn't offered on site it really defeats the whole purpose because if your car isn't running you can't drive it to where they need it and i was using this service to avoid tow fees to begin with, and on top of that when you can't have the repair done you lose the perk of using your diagnosis fee towards the repair, so I was really disappointed in that aspect. Brandon was an affable, punctual, and most of all knowledgeable mechanic whom I would recommend to others if what is wrong with your vehicle is an on site fix. He even gave me a way to contact him personally in case his diagnosis was wrong. I have yet to have the repair done, but I am confident that the fuel pump is and was the problem with my truck. Another plus was that he explained to me how he came to that conclusion by telling me his thought process along with showing me the supporting evidence of each step. He also looked over my engine to inform me of some other minor problems with my truck.

Excellent Rating

(8)

Rating Summary
7
1
0
0
0
7
1
0
0
0
Number of GMC Car starts and then dies Inspection services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Buy Good Quality Doors
It It happens to the best of us – accidents, shopping carts, the dings and weathering of time take their toll on your car door and soon you may find yourself shopping for a new one. The kind of car...
How to Find Car Safety Rating Online
Before purchasing a vehicle, it is a good idea to check out its safety rating. This allows you to better protect yourself and your family in the event of an accident. When checking the safety rating of the vehicles you...
P0347 OBD-II Trouble Code: Camshaft Position Sensor A Circuit Low Input (Bank 2)
P0347 P0347 code definition The P0347 Trouble Code refers to an issue with the camshaft position sensor A where the circuit input in bank 2 is too low. What the P0347 code means This is a generic code regarding the...

Warning regarding throttle and limp home mode

Hello. This is the first sign of a bad throttle body (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-throttle-body). This is a common failure on this vehicle. When the throttle motor or position sensor fails (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-throttle-position-sensor) this occurs as the computer can no longer control the throttle....

Oil on top of engine and car won't start

A sudden oil leak could be due to a head gasket failure, crack in the engine block or cylinder head, a plugged PCV system (causing oil to blow out through seals) or similar types of failures. Once the leak point...

Why do my brakes or wheels clunk when releasing my brakes in my 2009 Pontiac G6

Hello. It sounds like you may have an issue with the brake caliper no releasing or it may have an issue with the cv axle or an engine mount. Any of these will allow excessive movement or binding when releasing...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com