GMC Sierra 1500 Classic Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a GMC Sierra 1500 Classic Brake Vacuum Pump Replacement is $705 with $487 for parts and $218 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 ClassicV8-4.8LService typeBrake Vacuum Pump ReplacementEstimate$1238.14Shop/Dealer Price$1504.56 - $2252.05
2007 GMC Sierra 1500 ClassicV6-4.3LService typeBrake Vacuum Pump ReplacementEstimate$1192.14Shop/Dealer Price$1458.60 - $2206.12
2007 GMC Sierra 1500 ClassicV8-5.3LService typeBrake Vacuum Pump ReplacementEstimate$1192.14Shop/Dealer Price$1458.59 - $2206.12
2007 GMC Sierra 1500 ClassicV8-5.3L HybridService typeBrake Vacuum Pump ReplacementEstimate$1192.14Shop/Dealer Price$1458.54 - $2206.03
2007 GMC Sierra 1500 ClassicV8-6.0LService typeBrake Vacuum Pump ReplacementEstimate$1192.14Shop/Dealer Price$1458.63 - $2206.18
Show example GMC Sierra 1500 Classic Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

David

25 years of experience
180 reviews
David
25 years of experience
GMC Sierra 1500 Classic V8-4.8L - Heater Blower Motor Resistor - Ocala, Florida
David was amazing. The part was difficult to find but he made numerous phone calls and drove to at least two different part stores to locate it, then he finished the work and did a very good job. I highly recommend him. Very friendly and knows his stuff.

Peter

28 years of experience
534 reviews
Peter
28 years of experience
GMC Sierra 1500 Classic V6-4.3L - Oil Change - Newhall, California
Awesome job and experience!!! Peter was very professional and knowledgeable.

William

26 years of experience
65 reviews
William
26 years of experience
GMC Sierra 1500 Classic V8-4.8L - Oil/Fluid Leak - Pflugerville, Texas
He was very professional also explaining everything were I understood him what needs to be done

William

20 years of experience
129 reviews
William
20 years of experience
GMC Sierra 1500 Classic V8-5.3L - Oil Pressure Sensor - Estero, Florida
Very good work. I will use William again.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of GMC Sierra 1500 Classic services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Renew Your Car Registration in Montana
There There are a number of things in Montana that you will have to do in order to stay in compliance with state laws. If you drive a car on the Montana roadways, then you will have to register it...
The Guide to Right-of-Way Laws in New Mexico
There There are not always traffic signs and signals to tell motorists and pedestrians who should be given the right of way. Accordingly, there are common-sense rules in place that define who may go first, and who has to wait...
Understanding the Infiniti Maintenance Required and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Infiniti Maintenance Required light indicates when your car needs service.

When I stop and then start to accelerate the car jumps and lunges and doesn't seem to increase speed as it should.

Hello. Thank you for writing in. Typically vehicles jump and surge (https://www.yourmechanic.com/services/engine-is-shaking-pulsating-or-vibrating-inspection) due to spark or fuel issues. The computer is designed to keep the engine running within certain ranges, and when the vehicle doesn't have what it needs, it...

Fault code - P1031 - Intake Manifold tuning valve (n136) - set point not reached.

Hi there. Check the air control flap for if its tight or sticking. Also look at the hose connections to the air control flap. Check the intake manifold air control actuator and the intake manifold air control solenoid to see...

New tires vs cv placement

The CV axle has to be replaced first because removal and installation of an axle can alter wheel alignment. If you align the car first and replace the axle, you might have to align it again, or at the very...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com