GMC R2500 Suburban Transfer case fluid is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(3,002)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(3,002)

Transfer case fluid is low Inspection Service

How much does a Transfer case fluid is low Inspection cost?

On average, the cost for a GMC R2500 Suburban Transfer case fluid is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 GMC R2500 SuburbanV8-6.2L DieselService typeTransfer case fluid is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 GMC R2500 SuburbanV8-5.7LService typeTransfer case fluid is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 GMC R2500 SuburbanV8-5.7LService typeTransfer case fluid is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 GMC R2500 SuburbanV8-6.2L DieselService typeTransfer case fluid is low InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1991 GMC R2500 SuburbanV8-5.7LService typeTransfer case fluid is low InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1987 GMC R2500 SuburbanV8-5.7LService typeTransfer case fluid is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 GMC R2500 SuburbanV8-6.2L DieselService typeTransfer case fluid is low InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1989 GMC R2500 SuburbanV8-7.4LService typeTransfer case fluid is low InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC R2500 Suburban Transfer case fluid is low Inspection prices

If you have a four-wheel drive or an all-wheel drive car, you have more than just the engine and the transmission to worry about. You also have a transfer case, which is responsible for sending power from the transmission to all four wheels via drive shafts. If your transfer case fluid is low, there’s a problem that should be repaired before you can safely drive.

How this system works:

A transfer case does exactly what the name implies – it transfers power from the transmission to the wheels. However, it will work differently depending on the type of vehicle you drive. If you drive a four-wheel drive truck, then the primary wheels are driven by the driveshaft and the transfer case really only comes into play when you engage four-wheel drive mode. However, if you have an all-wheel drive vehicle, or an all-time four-wheel drive system, then the transfer case will be used at all times (because all four wheels must work at once, at all times).

The transfer case mounts to the end of the transmission, and a shaft extends from the transmission into the transfer case. Inside the transfer case, there are internal forks and gears that are responsible for transmitting the rotational power of the transmission to two other drive shafts – one going to the rear differential, and another going to the front differential. Within each differential, rotational power is split again, and redirected at 90 degrees to each wheel.

Common reasons for this to happen:

  • Leaking Input Seal at Transmission: If you’re experiencing low transfer case fluid, one of the first possible problems to consider is the input seal on the transmission side of things. Over time and through normal wear and tear, these seals will degrade, eventually letting fluid seep out.

  • Leaking Output Shaft Seal Rear: Another potential problem is the output shaft seal where the rear drive shaft attaches to the transfer case. Like the input seal on the transmission side, this one can also wear to the point that it begins to leak.

  • Leaking Output Shaft Seal Front: You have one other potential seal that might be leaking. This one is located where the front drive shaft connects with the transfer case. Like the other two we’ve mentioned, this seal will eventually degrade and begin to leak.

  • Leaking Vent Hose: While unlikely, it’s possible that you’re losing transfer case fluid from the vent hose.

  • Failed Speed Sensor Gasket: If your transfer case is equipped with a speed sensor, it’s possible that you’re leaking fluid around the sensor (the seal has failed).

  • Leaking Transfer Case Gasket: The transfer case gasket is a lot like an oil pan gasket in that it will eventually degrade to the point that it begins to leak fluid (all gaskets and seals on your vehicle are subject to wear, leakage and eventual failure).

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the leak from your transfer case, as well as the condition of all seals and the level of your fluid. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect the transfer case first to determine the location of the leak. It may be necessary to clean old fluid from the transfer case and then test drive the vehicle to determine the actual source of the leak. The mechanic will also check the level of fluid.

How important is this service?

If your transfer case is leaking, the internals are in danger of experiencing high heat and friction. Just like your differentials and your transmission, the moving parts within the transfer case must be lubricated properly at all times, or damage will result (depending on the setup of your vehicle, damaged transfer case components could leave the vehicle unable to be driven). One of our professional mechanics can inspect your transfer case, determine the point of the leak, and repair the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(3,002)

Rating Summary
2,842
79
21
10
50
2,842
79
21
10
50

Victor

35 years of experience
229 reviews
Victor
35 years of experience
GMC Acadia V6-3.6L - Radiator - Albuquerque, New Mexico
Victor was on time, friendly, all around great. I was nervous booking for the first time, but I'll definitely be booking with Victor again.

James

31 years of experience
705 reviews
James
31 years of experience
GMC Yukon XL 1500 V8-5.3L - Heater Control Valve - Los Angeles, California
A knowledgeable and experience competent employee. I felt poorly comfortable in his ability to do the job and do it well I will be using his service again in the near future and will recommend it to all my friends and family. ⭐️⭐️⭐️⭐️⭐️

Mauricio

40 years of experience
85 reviews
Mauricio
40 years of experience
GMC Yukon XL 1500 V8-6.0L - Car Starter Repair - San Gabriel, California
He was very courteous and knowledgeable about his work.

Tyler

12 years of experience
20 reviews
Tyler
12 years of experience
GMC Envoy L6-4.2L - Power steering fluid is leaking - Chicago, Illinois
Very good

Excellent Rating

(3,002)

Rating Summary
2,842
79
21
10
50
2,842
79
21
10
50
Number of GMC services completed
33022+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Can Dirt and Mud Ruin Windshield Wiper Blades?
Your Your wiper blades are responsible for clearing a viewable path on your windshield so you can see where you’re going. They wipe away rain, snow, ice, dust, dirt, bird droppings, and any other debris that ends up on the...
How Much Does a Mechanic Make in California?
Automotive technician jobs in California have an average salary of $44K, and the state industry is growing rapidly.
How to Troubleshoot a Small Engine Problem
Small car engines need attention if the car won't start, there's a loss of power, the car stalls or overheats, or if the car backfires.

The belt came off the pulleys

One of the first things that should be checked when dealing with a serpentine belt that has come off would be to check that all of the pulleys that are used for power steering, water pump, idler pulleys, alternator, crankshaft,...

Stops accelerating while driving - 2002 Ford Crown Victoria

The problem is most likely in the fuel supply system of the vehicle. When the vehicle is running okay, turn the key on and off to see if you can hear the fuel pump in the tank. Now when the...

I hear a humming noise that I think is coming from the transmission.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com