GMC R1500 Suburban Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(21)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(21)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a GMC R1500 Suburban Intake Manifold Gaskets Replacement is $492 with $86 for parts and $406 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 GMC R1500 SuburbanV8-6.2L DieselService typeIntake Manifold Gaskets ReplacementEstimate$839.26Shop/Dealer Price$904.96 - $1068.85
1991 GMC R1500 SuburbanV8-5.7LService typeIntake Manifold Gaskets ReplacementEstimate$826.22Shop/Dealer Price$890.65 - $1067.04
1990 GMC R1500 SuburbanV8-6.2L DieselService typeIntake Manifold Gaskets ReplacementEstimate$627.13Shop/Dealer Price$683.46 - $840.33
1990 GMC R1500 SuburbanV8-5.7LService typeIntake Manifold Gaskets ReplacementEstimate$651.03Shop/Dealer Price$713.33 - $888.12
Show example GMC R1500 Suburban Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0

John

28 years of experience
72 reviews
John
28 years of experience
GMC R1500 Suburban V8-5.7L - Oil Pressure Sensor - Stuart, Florida
very helpful and easy to talk with.

Joel

22 years of experience
987 reviews
Joel
22 years of experience
GMC R1500 Suburban V8-5.7L - Steering wheel feels loose - Jacksonville, Florida
Very knowledgeable

Henry

35 years of experience
177 reviews
Henry
35 years of experience
GMC Sonoma V6-4.3L - Intake Manifold Gaskets - Sicklerville, New Jersey
Very meticulous with his work, one of the best around. Strongly recommend.

Russell

25 years of experience
356 reviews
Russell
25 years of experience
GMC C1500 V8-5.0L - Intake Manifold Gaskets - Vancouver, Washington
Good experience. Russell worked hard considering the adverse conditions

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0
Number of GMC Intake Manifold Gaskets Replacement services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P2573 OBD-II Trouble Code: Direct Ozone Reduction Catalyst Sensor Circuit Range/Performance
P2573 code means the sensors do not detect deterioration due to faulty catalyst, oxygen or temperature sensor, or lack of fuel or coolant.
How to Replace a Cruise Control Vacuum Reservoir
The cruise control system has a failing vacuum reservoir if the cruise control does not hold speed or you hear a hissing noise coming from the car.
How to Buy a Good Quality Oil Pan Gasket
When When your garage floor looks like an oil slick, there’s a good possibility that you will be shopping for a new oil pan gasket in the near future. While oil leaks can also be caused by a loose oil...

What is this part called ?

The round disc you see is just a rubber plug that covers the access port to the transmission torque converter drain plug. If you are leaking oil from this location you will need to first see if it is engine...

RPM increasing but car won't drive

What you are describing may be a result of a faulty speed sensor, potentially low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a even a faulty transmission control solenoid. As your vehicle travels down the road, the computer analyzes data being sent by...

P0430 code, engine running fine

Diagnostic Trouble Code P0430 (https://www.yourmechanic.com/article/p0430-obd-ii-trouble-code-catalyst-system-efficiency-below-threshold-bank-2-by-spencer-clayton) means that the ECU is detecting below threshold performance from the catalytic converter. The ECU monitors the catalytic converter closely and when a low performance threshold is detected the Check Engine Light will be displayed...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com