GMC G3500 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a GMC G3500 Wheel Bearings Replacement is $166 with $26 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 GMC G3500V6-4.3LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$258.98Shop/Dealer Price$278.03 - $324.65
1993 GMC G3500V8-7.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$247.27Shop/Dealer Price$264.02 - $308.92
1995 GMC G3500V6-4.3LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$203.23Shop/Dealer Price$219.40 - $263.72
1995 GMC G3500V8-7.4LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$203.23Shop/Dealer Price$219.40 - $263.72
1990 GMC G3500V6-4.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$247.03Shop/Dealer Price$265.67 - $311.85
1995 GMC G3500V8-5.7LService typeWheel Bearings - Driver Side Front ReplacementEstimate$203.23Shop/Dealer Price$219.54 - $263.97
1993 GMC G3500V8-6.2L DieselService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$247.27Shop/Dealer Price$264.07 - $309.01
1990 GMC G3500V8-5.7LService typeWheel Bearings - Driver Side Front ReplacementEstimate$247.03Shop/Dealer Price$263.75 - $308.49
Show example GMC G3500 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

William

35 years of experience
731 reviews
William
35 years of experience
GMC G3500 V8-5.7L - Steering wheel feels loose Inspection - Peoria, Arizona
As usual, William was fantastic, and explained/showed me the issue in detail. He is very customer service oriented & extreamly knowledgeable!!!

Derrick

12 years of experience
184 reviews
Derrick
12 years of experience
GMC G3500 V8-5.7L - Car Starter Repair - Alameda, California
Derrick showed up on time and completed the job on time and is a nice man.

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
GMC G3500 V8-7.4L - Car is not starting - Denver, Colorado
He did a great job.

Dellano

19 years of experience
554 reviews
Dellano
19 years of experience
GMC G3500 V8-5.7L - Parking brake is stuck - Washington, District of Columbia
Figured out the problem right away that there is no problem with the brakes system.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC G3500 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Register a Car in Iowa
Moving Moving to a new area can be a bit of a stressful situation due to the wide variety of things that have to be handled when attempting to get settled in. For new residents to the state of Iowa,...
How Long Does a Clutch Master Cylinder Last?
The The clutch master cylinder is linked to the clutch slave cylinder through a series of hoses. Once you depress the clutch, brake fluid moves from the clutch master cylinder into the slave cylinder. This applies the necessary pressure to...
4 Essential Things to Know About Your Car’s Odometer
The The odometer on a car tells how far the vehicle has traveled. It can be mechanical, electrical, or a combination of the two. Part of the odometer includes a trip meter. A trip meter indicates how far the car...

Why why does the check engine light come on but runs fine until it gets to 2500 RPMs then it stutters

Hi there. It is possible that you could have a bad camshaft (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) or crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement). These sensors keep track of the timing of the engine and send signals to the vehicles PCM. If one of these sensors...

My car cuts off when I slow down and shows code P0335

Hi there. Your vehicle shutting down while driving, after replacing a faulty CKP (crankshaft position sensor) and the ECM (engine control module) recognizing a P0335 circuit malfunction, leads me to believe the replacement CKP sensor may be faulty (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement). Sometimes,...

Thank you Tim. Appreciate SO much. We agree but needed a professionals confirmation.

Hi Corine: I will help you further with your follow-up concerns (these questions are assigned randomly; that is the only reason Tim is not getting back to you directly). Basically, if you are shopping for a vehicle the "general" rule...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com