Ford Police Interceptor Sedan Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Ford Police Interceptor Sedan Serpentine/Drive Belt Replacement is $170 with $30 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Ford Police Interceptor SedanV6-3.7LService typeSerpentine/Drive Belt ReplacementEstimate$214.00Shop/Dealer Price$232.35 - $279.30
2013 Ford Police Interceptor SedanV6-3.7LService typeSerpentine/Drive Belt ReplacementEstimate$244.99Shop/Dealer Price$271.57 - $347.20
2016 Ford Police Interceptor SedanV6-3.5LService typeSerpentine/Drive Belt ReplacementEstimate$204.99Shop/Dealer Price$221.60 - $267.24
2018 Ford Police Interceptor SedanV6-3.7LService typeSerpentine/Drive Belt ReplacementEstimate$204.99Shop/Dealer Price$221.60 - $267.24
2013 Ford Police Interceptor SedanV6-3.5LService typeSerpentine/Drive Belt ReplacementEstimate$204.99Shop/Dealer Price$223.07 - $269.82
2014 Ford Police Interceptor SedanV6-3.5L TurboService typeSerpentine/Drive Belt ReplacementEstimate$204.99Shop/Dealer Price$221.74 - $267.49
2013 Ford Police Interceptor SedanV6-3.5L TurboService typeSerpentine/Drive Belt ReplacementEstimate$204.99Shop/Dealer Price$221.61 - $267.27
2017 Ford Police Interceptor SedanV6-3.5LService typeSerpentine/Drive Belt ReplacementEstimate$204.99Shop/Dealer Price$221.60 - $267.24
Show example Ford Police Interceptor Sedan Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
Ford Police Interceptor Sedan V6-3.5L - Car is not starting - Indianapolis, Indiana
He’s great. Hilarious guy and very friendly. Really a people person. Keep up the great work!

Colin

28 years of experience
117 reviews
Colin
28 years of experience
Ford Police Interceptor Sedan V6-3.7L - Noise from engine or exhaust - Pinellas Park, Florida
Very thorough A+++

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
Ford Police Interceptor Sedan V6-3.5L - Oil Change - Kansas City, Missouri
As always Andrew did a good job and as always the call center is HORRIBLE to deal with.

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
Ford Police Interceptor Sedan V6-3.5L - Alternator - Indianapolis, Indiana
Bryan goes above and behind the call of service to ensure his clients are taken care of.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Ford Police Interceptor Sedan services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

How to Remove Spray Paint From a Car
It’s It’s more than frustrating to walk out to your car to find that it’s been defaced with spray paint -- it also needs immediate attention. You need to get over your anger quickly so you can begin removing the...
How to Get a Louisiana Driver's Permit
The The Louisiana Office of Motor Vehicles requires all teen drivers to participate in a graduated driver's licensing program. The first step in this program is to obtain a learner’s permit, which graduates to a full license as the driver...
What Causes Fuel Injectors to Get Clogged or Dirty?
Fuel injectors deliver fuel into the cylinder for combustion. Clogged fuel injectors can be caused by debris or impurities in the fuel.

Brake pads for 2013 Subaru XV Crosstrek

You cannot go wrong using factory replacement pads since you know how long they will last and they were certified to work on your vehicle. There may be as many as 10 different aftermarket pads on the market and all...

Car makes a loud sound every time I start my car, at idle, and when driving at low speeds

Hello. The first thing to check would be your fluid levels. I'm not sure what type of noise you have, but ticking noises at idle can be linked to a low oil level. If there is a vacuum leak, the...

Check Engine Light is on - 2009 Chevrolet Malibu

If you have codes to a sensor, it does not always mean the sensor is bad. There may be wiring or connector problems causing erratic or incorrect sensor input to the computer. The code stored in a computer is only...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com