Ford Mustang Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Ford Mustang Control Arm Assembly Replacement is $212 with $72 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Ford MustangV6-4.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$658.34Shop/Dealer Price$775.33 - $1093.88
2003 Ford MustangV6-3.8LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$631.14Shop/Dealer Price$728.29 - $1000.14
2004 Ford MustangV8-4.6L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$981.68Shop/Dealer Price$1153.84 - $1646.29
2012 Ford MustangV8-5.4L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$682.82Shop/Dealer Price$802.56 - $1145.07
2008 Ford MustangV6-4.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$770.77Shop/Dealer Price$929.66 - $1383.84
2015 Ford MustangV8-5.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1395.52Shop/Dealer Price$1694.00 - $2571.45
2018 Ford MustangL4-2.3L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1075.88Shop/Dealer Price$1265.21 - $1823.52
1992 Ford MustangL4-2.3LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$588.31Shop/Dealer Price$700.35 - $1024.97
Show example Ford Mustang Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(7)

Rating Summary
6
0
0
0
1
6
0
0
0
1

Excellent Rating

(7)

Rating Summary
6
0
0
0
1
6
0
0
0
1
Number of Ford Mustang Control Arm Assembly Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

Child Seat Safety Laws in Texas
When When children are injured, or even killed, in motor vehicle accidents, it is often because the driver is in violation of the child seat safety laws for their state. In Texas, the child seat safety laws are based in...
How to Prepare for the Hawaii Driver’s Written Test
Few Few places in the world are as beautiful as Hawaii, and it is understandable that you want to get your license so you can go out there and enjoy all of them in your vehicle. Of course, before you...
How to Replace a Lost or Stolen Car Title in Vermont
You've You've probably never given your car title much thought before. Really, unless you are transferring ownership of your vehicle, or selling it, the title doesn't come into play. That's exactly why it's so easy for it to go missing,...

Engine making high-pitched noise

Hi, this typically points to an issue with one of your serpentine belts. These belts drive different components on the vehicle such as the water pump, alternator, and A/C compressor. Over time, they will begin to lose their grip which...

The gear shiter is stuck in park I have to manually shift it and the brake lights don't work.

Hi, thanks for writing in. There are several causes for the symptoms you are having. First, if you need to unlock the shifter, there is an override button you can use to unlock it. It will be a small slot...

I just had a diagnostic performed on my car and the following error code came up P0299 boost control sensor.

Hi there. Check to see what the oil pressure is in the engine. If the oil pressure is low, then the P0299 (https://www.yourmechanic.com/article/p0299-obd-ii-trouble-code-turbo-supercharger-underboost-condition-by-spencer-clayton) code can appear. Also, check for the EGR operation and see if its sticking. A faulty EGR...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com