Ford Freestar Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Ford Freestar Serpentine/Drive Belt Replacement is $195 with $55 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Ford FreestarV6-4.2LService typeSerpentine/Drive Belt ReplacementEstimate$284.12Shop/Dealer Price$320.00 - $419.54
2007 Ford FreestarV6-3.9LService typeSerpentine/Drive Belt ReplacementEstimate$275.11Shop/Dealer Price$309.22 - $407.44
2006 Ford FreestarV6-3.9LService typeSerpentine/Drive Belt ReplacementEstimate$255.73Shop/Dealer Price$285.02 - $368.72
2004 Ford FreestarV6-3.9LService typeSerpentine/Drive Belt ReplacementEstimate$275.11Shop/Dealer Price$309.25 - $407.48
2006 Ford FreestarV6-4.2LService typeSerpentine/Drive Belt ReplacementEstimate$255.73Shop/Dealer Price$286.50 - $371.30
2004 Ford FreestarV6-4.2LService typeSerpentine/Drive Belt ReplacementEstimate$275.11Shop/Dealer Price$309.39 - $407.73
2005 Ford FreestarV6-4.2LService typeSerpentine/Drive Belt ReplacementEstimate$275.11Shop/Dealer Price$309.26 - $407.51
2005 Ford FreestarV6-3.9LService typeSerpentine/Drive Belt ReplacementEstimate$275.11Shop/Dealer Price$309.25 - $407.48
Show example Ford Freestar Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Ford Freestar Serpentine/Drive Belt Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing EGR Vacuum Modulator
Common signs include engine performance issues, the Check Engine Light coming on, and failing an emissions test.
P0680 OBD-II Trouble Code: Cylinder 10 Glow Plug Circuit
P0680 means the system reference voltage allowed by the vehicle’s ECM has exceeded 10% of the allowed variance due to a defective plug, or module.
How to Prepare for the Tennessee Driver’s Written Test
As As excited as you might be to get out and start driving, you have to take and pass the Tennessee driver’s written test first so you can get your permit and then take the road test. Many people become...

Died while driving, now it cranks but doesn't start.

The codes for the cam sensor may indicate the cam sensor is bad or the camshaft is not turning. If your timing belt broke then your camshaft would not turn. You should open the oil cap and look inside when...

Engine Malfunction, power reduced

Hello, and thank you for writing in. You are thinking in the right direction. Start by inspecting the throttle body, air intake, and the throttle and intake sensors. Make sure the electrical connections are all clean, dry, and tight. You...

07 maxima stalls while slowing down,turning atw left,or just randomly.sometimes the power goes out but the engine stays on.

Hi There, If you have a bad catalytic converter, this may definitely cause the symptoms you are describing. A clogged or failing catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement) can cause the vehicle to have poor fuel economy. As you may already know, the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com