Ford Five Hundred Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(163)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(163)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Ford Five Hundred Mass Airflow Sensor Replacement is $225 with $130 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Ford Five HundredV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$375.07Shop/Dealer Price$450.09 - $652.65
2007 Ford Five HundredV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$355.07Shop/Dealer Price$430.11 - $632.68
2006 Ford Five HundredV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$355.07Shop/Dealer Price$430.11 - $632.68
Show example Ford Five Hundred Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(163)

Rating Summary
153
5
1
1
3
153
5
1
1
3

Mario

20 years of experience
110 reviews
Mario
20 years of experience
Ford Five Hundred V6-3.0L - Oil Change - San Diego, California

Nelson

26 years of experience
163 reviews
Nelson
26 years of experience
Ford Five Hundred V6-3.0L - Alternator - Carmichael, California
Quick, convient and no stress! Thank you!!

Joseph

33 years of experience
540 reviews
Joseph
33 years of experience
Ford Five Hundred V6-3.0L - Water Pump - Dallas, Texas
He was right on time for the service appointment. He was frieldly too.

Brikk

18 years of experience
389 reviews
Brikk
18 years of experience
Ford Five Hundred V6-3.0L - Car is not starting - Charlotte, North Carolina
My mechanic was very helpful..excellent service

Excellent Rating

(163)

Rating Summary
153
5
1
1
3
153
5
1
1
3
Number of Ford Five Hundred services completed
1793+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Buy Good Quality Sensors
Sensors Sensors for autos have many of the same characteristics that other types of sensors do – they are created to detect a signal, respond to chemical or physical variations such as distance or temperature. These signals are then converted...
Symptoms of a Bad or Failing Oil Temperature Sensor
If the temperature gauge gives false readings or does not move, you may need to replace the oil temperature sensor.
How Long Does a Crankshaft Position Sensor Last?
The The crankshaft position sensor monitors the rotational speed and position of the crankshaft in the engine. It reports this information to the engine management system to control the ignition system timing. The crankshaft position sensor is used with the...

Car parked for 1 month has dead battery

The engine computer definitely needs to see engine RPM in order to power the coil. Between the ignition coils and the engine computer is an ignition coil power output stage unit which is supplied power from the engine computer. The...

Speed sensor p01443 code

Hello. The speed sensor is located on the left rear of the transmission. It should be accessible from the bottom of the transmission. The catalytic converters should not have to be moved in order to get to the sensor. Most...

My 2004 Nissan X-Trail is intermittently stalling at traffic lights and stop signs.

Hi there. Having the exhaust manifold repaired should not have contributed to the engine stalling. Assuming, the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is not coming on, leads me to believe the ECM (engine control module)/computer is not recognizing the fault. As...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com