Ford F-350 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(42)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(42)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Ford F-350 Car Thermostat Replacement is $159 with $64 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Ford F-350V8-5.8LService typeCar Thermostat ReplacementEstimate$243.73Shop/Dealer Price$285.92 - $389.97
1982 Ford F-350V8-6.6LService typeCar Thermostat ReplacementEstimate$299.97Shop/Dealer Price$361.23 - $522.48
1992 Ford F-350L6-4.9LService typeCar Thermostat ReplacementEstimate$226.69Shop/Dealer Price$269.63 - $375.92
1975 Ford F-350V8-7.5LService typeCar Thermostat ReplacementEstimate$302.51Shop/Dealer Price$364.39 - $527.52
1970 Ford F-350L6-4.9LService typeCar Thermostat ReplacementEstimate$279.59Shop/Dealer Price$335.77 - $481.75
1987 Ford F-350V8-7.5LService typeCar Thermostat ReplacementEstimate$232.11Shop/Dealer Price$276.41 - $386.76
1979 Ford F-350L6-4.9LService typeCar Thermostat ReplacementEstimate$284.59Shop/Dealer Price$340.62 - $486.48
1980 Ford F-350V8-5.0LService typeCar Thermostat ReplacementEstimate$372.97Shop/Dealer Price$451.47 - $663.90
Show example Ford F-350 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(42)

Rating Summary
39
1
0
0
2
39
1
0
0
2

Dameron

17 years of experience
171 reviews
Dameron
17 years of experience
Ford F-350 V8-7.3L Diesel - Starter - Greenfield, Indiana
Dameron, showed up on time and was very professional. Any future work I will definitely request him.

Diego

21 years of experience
564 reviews
Diego
21 years of experience
Ford F-350 V8-7.5L - Water Pump - Phoenix, Arizona
Good guy, fast, and double-checks his work.

Andrew

15 years of experience
499 reviews
Andrew
15 years of experience
Ford F-350 V8-7.5L - Car is not starting - Portland, Oregon
On time. Went right to work, ID'd the problem and fixed the truck! Excellent job.

Jerimiah

19 years of experience
328 reviews
Jerimiah
19 years of experience
Ford F-350 V8-7.5L - Custom Diagnostic - Henderson, Nevada
Great Mechanic....found my problem quickly, got me back on road FAST. Thanks for great service!

Excellent Rating

(42)

Rating Summary
39
1
0
0
2
39
1
0
0
2
Number of Ford F-350 services completed
462+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

P0600 OBD-II Trouble Code: Serial Communication Link Malfunction
P0600 code definition The P0600 code is a diagnostic trouble code that points to a malfunction in the communication link of the...
How to Install Aftermarket Springs
Switching Switching out your stock springs (https://www.yourmechanic.com/article/how-long-do-suspension-springs-last) for aftermarket springs can have a huge impact on your car. Whether you’re going for a sporty feeling, or even just a different look by lowering the car, new springs can make your...
How to Replace a Cooling Fan Relay on Most Vehicles
Cooling fan relays fail when the radiator cooling fan no longer receives an electrical signal. A broken fan relay means the radiator cannot cool down.

I got a diagnosis for a 2012 X6 saying the combustion misfires due to faulty ignition coil and I've gotten a recommendation to rep

Hello, and thank you for writing in. Getting a second opinion is always a good idea. Replacing the spark plugs is a very necessary part of maintenance that is often overlooked. It is never a bad idea to replace your...

2010 Rav4 Left turn signal comes on intermittently when switch is off. Will blink left and right if I turn right turn signal on.

This problem does sound like the turn signal switch is shorting and should be replaced first to see if it is cause of short.

Timing belt just changed. Car makes whirring noise when I accelerate. Is this normal?

Without actually hearing the noise myself I would suggest having the noise isolated to see if it is in the timing belt on the tensioner being too tight or tensioner pulley is defective. You may even need to remove the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com