Ford Explorer Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Ford Explorer Headlight Bulb Replacement is $148 with $8 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Ford ExplorerV6-4.0LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$185.60Shop/Dealer Price$196.85 - $222.50
2015 Ford ExplorerV6-3.5LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.07 - $210.40
1996 Ford ExplorerV8-5.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
2009 Ford ExplorerV6-4.0LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$208.67Shop/Dealer Price$226.20 - $274.60
2002 Ford ExplorerV6-4.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$187.57 - $213.02
1998 Ford ExplorerV6-4.0LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.24 - $210.69
2013 Ford ExplorerV6-3.5L TurboService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.11 - $210.47
2009 Ford ExplorerV8-4.6LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$208.67Shop/Dealer Price$226.20 - $274.60
Show example Ford Explorer Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Raymond

35 years of experience
252 reviews
Raymond
35 years of experience
Explorer 2014 - Headlight Bulb - Las Vegas, NV
Raymond did a great job, had part of the job he could access before we got there done by the time we got to our car, then finished up quickly. Great experience

Devin

6 years of experience
15 reviews
Devin
6 years of experience
Explorer 2002 - Car is not starting - Lake Wales, FL
Mechanic was on time, he was friendly and professional.

Robert

15 years of experience
49 reviews
Robert
15 years of experience
Explorer 2002 - Car is not starting - Lafayette, CA
On time, polite, knowelgable

Colin

24 years of experience
127 reviews
Colin
24 years of experience
Explorer 1999 - Car is shaking or vibrating - Largo, FL
He was knowledgeable and polite

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Ford Explorer Headlight Bulb Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

What Causes a Car to Stall?
You trust your car. You may not think about it, but you believe that certain functions will occur without fail. You may be aware...
When Should I Rotate My Tires?
Refer Refer to your owner's manual for the exact tire rotation schedule for your car. The general recommendation is that tires be rotated every 5,000 to 8,000 miles, and this often coincides with oil changes. Consider exploring an in depth...
How Long Does a Brake Caliper Last?
The The braking system on your car has a variety of different parts that have to work together in order to bring the car to a stop. Most car owners take their braking system for granted until there is a...

engine rebuild

Hi there. Our "How to" articles (https://www.yourmechanic.com/article/how-to-rebuild-a-car-engine) are written as usually general guidelines - not specific instructions that apply to a particular vehicle. We don't specify the precise steps for completing any repair because the reality is that every vehicle...

Idles very rough when heater/defroster is on

Hello, thank you for writing in. The vehicle is put under extra load when the climate control is turned on. The engine is impacted different ways by the different systems. Typically when the defroster is turned on, it uses the...

Where is the map sensor location on a Chrysler 200 2015

The sensor plug is visible on the intake manifold. Look for a 3-wire plug on the intake manifold that has the following wire colors: Pink wire (MAP signal wire), Green wire (MAP ground wire), and Yellow wire (5 volt supply...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com