Ford Expedition Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Ford Expedition Power Steering Pump Replacement is $404 with $124 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Ford ExpeditionV8-5.4LService typePower Steering Pump ReplacementEstimate$567.20Shop/Dealer Price$638.70 - $837.00
1997 Ford ExpeditionV8-5.4LService typePower Steering Pump ReplacementEstimate$656.37Shop/Dealer Price$723.41 - $912.96
2000 Ford ExpeditionV8-5.4LService typePower Steering Pump ReplacementEstimate$656.37Shop/Dealer Price$723.48 - $913.08
1999 Ford ExpeditionV8-4.6LService typePower Steering Pump ReplacementEstimate$656.37Shop/Dealer Price$723.47 - $913.07
2001 Ford ExpeditionV8-5.4LService typePower Steering Pump ReplacementEstimate$568.78Shop/Dealer Price$638.01 - $829.20
2008 Ford ExpeditionV8-5.4LService typePower Steering Pump ReplacementEstimate$592.98Shop/Dealer Price$661.87 - $858.22
2005 Ford ExpeditionV8-5.4LService typePower Steering Pump ReplacementEstimate$561.40Shop/Dealer Price$632.50 - $837.38
1998 Ford ExpeditionV8-4.6LService typePower Steering Pump ReplacementEstimate$656.37Shop/Dealer Price$723.47 - $913.07
Show example Ford Expedition Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(4)

Rating Summary
3
0
1
0
0
3
0
1
0
0

Lee

35 years of experience
164 reviews
Lee
35 years of experience
Expedition 2004 - Power Steering Pump - Oklahoma City, OK
Knows what he is doing! Was on time and great service!

Nezar

22 years of experience
15 reviews
Nezar
22 years of experience
Expedition 2014 - Brake Pads - Fort Lauderdale, FL
Nezarwas early worked fast did a great job highly recomend him

Juan

10 years of experience
47 reviews
Juan
10 years of experience
Expedition 2004 - Cabin Air Filter - Fairfield, CA
very knowledgeable and professional.

Juan

10 years of experience
47 reviews
Juan
10 years of experience
Expedition 2004 - Tune-up - Fairfield, CA
very knowledgeable and professional.

Excellent Rating

(4)

Rating Summary
3
0
1
0
0
3
0
1
0
0
Number of Ford Expedition Power Steering Pump Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

How to Use Blind Spot Mirrors
For For most passenger cars and trucks, the blind spot mirror is not necessary if you’re able to correctly adjust your side view mirrors. However, many drivers do find it simpler to add these aftermarket accessories (and some larger vehicles...
How to Prepare for the Virginia Driver’s Written Test
Before Before you can drive in Virginia, you need to take your driver’s written test so you can then get your learner’s permit and take the road test. You have to remember that driving is a privilege and not a...
A Buyer’s Guide to the 2012 Mercedes-Benz CL-Class
Think Think of the 2012 Mercedes-Benz CL-Class as the two-door cousin of the S-Class lineup. Each vehicle in this class is a stylish, sexy coupe. What’s more – they all manage to combine incredible performance with svelte styling. They might...

Intermittent airbag service light

Fault codes need to be read out of the SRS system to determine the cause of the Air Bag Light being illuminated (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-the-air-bag-light-on). One common cause could be a faulty seat occupancy sensor. These are used to determine the firing...

Car stopped starting one day. Cranks and keeps cranking. just won't fully start. Hooked up a code reader and nothing came back.

Hi there. I used the acronym FAST for my no start concerns; this is for the basics. I check for Fuel, Air, Spark, and Timing. Make sure the air filter is not clogged and that the there are no codes...

My mercedes c300 says collision prevention assist plus inoperative

The warning light means there is an electrical malfunction in the collision avoidance system and that could involve sensors, wiring, the control computer and so forth. Anybody who fixes it (whether you, a Mechanic, etc.) has to have in hand...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com