Ford EcoSport Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(649)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(649)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Ford EcoSport Serpentine/Drive Belt Replacement is $144 with $50 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Ford EcoSportL4-2.0LService typeSerpentine/Drive Belt ReplacementEstimate$213.99Shop/Dealer Price$248.74 - $330.49
2018 Ford EcoSportL3-1.0L TurboService typeSerpentine/Drive Belt ReplacementEstimate$193.99Shop/Dealer Price$228.76 - $310.52
Show example Ford EcoSport Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(649)

Rating Summary
616
20
3
2
8
616
20
3
2
8

Derrick

11 years of experience
170 reviews
Derrick
11 years of experience
Ford EcoSport L4-2.0L - Battery - Oakland, California
It was the best experience that I have in the Bay Area. He was professional, friendly and knowledgeable in his craft, and would highly recommend him to anyone that needs their car fixed on the spot.

Michael

21 years of experience
244 reviews
Michael
21 years of experience
Ford F-150 V8-5.4L - Serpentine/Drive Belt - Norco, California
Right on time and finished the job quickly. Considering what it would have cost to get towed to a shop and have the work done, it was a great deal. I highly recommend Mike as a mechanic.

Luke

17 years of experience
150 reviews
Luke
17 years of experience
Ford F-350 Super Duty V8-6.7L Turbo Diesel - Serpentine/Drive Belt - Austin, Texas
Luke was a great mechanic. He showed up on time, was professional, and focused on doing a great job. Luke took time to explain the work that needed to be done, got to work, and finished well ahead of schedule. He was super fast and his work was outstanding. I will definitely rely on Luke for the next car repair I need, and highly recommend him.

Duane

25 years of experience
510 reviews
Duane
25 years of experience
Ford Focus L4-2.3L - Serpentine/Drive Belt Replacement - Fallbrook, California
Serpentine belt and tensioner replacement. He also gave me great recommendations. He's really professional and courteous.

Excellent Rating

(649)

Rating Summary
616
20
3
2
8
616
20
3
2
8
Number of Ford Serpentine/Drive Belt Replacement services completed
7139+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How Long Does a Heater Control Valve Last?
Keeping Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements of the coolant system can lead to a...
Rules of the Road For Arizona Drivers
While While you know that most road rules are based in common sense, many others are in place to make sure you and other drivers are safe while on the roads. Even if you are familiar with the laws in...
How to Adjust an Alternator Bracket
Alternator bracket replacement typically means an entire alternator belt replacement in modern cars.

Getting random misfire code.

Your Chrysler sets a P0300 random or multiple misfire code when more than a 1.8% misfire rate is measured during two trips. Countless issues can set this code, from a vacuum leak to a bad coil pack. Your engine is...

vibration and smoke from tail pipe

Check for diagnostic trouble codes. If the smoke is blue, oil is getting into the combustion chambers and perhaps the rough running is due to partly fouled plugs. If the smoke is black, the air fuel ratio is way off...

Engine start and open its oil cap its get dancing on that means air pressure come is it OK or some problem

Hi there. Anytime you start the motor, the oil cap needs to be kept on tight. The cap is responsible not only for keeping oil from spilling and escaping, but most importantly, maintaining a consistent vacuum pressure inside the motor....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com