Ford Crown Victoria Steering wheel feels loose Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(222)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(222)

Steering wheel feels loose Inspection Service

How much does a Steering wheel feels loose Inspection cost?

On average, the cost for a Ford Crown Victoria Steering wheel feels loose Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Ford Crown VictoriaV8-4.6LService typeSteering wheel feels loose InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1998 Ford Crown VictoriaV8-4.6LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2002 Ford Crown VictoriaV8-4.6LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Ford Crown VictoriaV8-4.6LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2004 Ford Crown VictoriaV8-4.6LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1994 Ford Crown VictoriaV8-4.6LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1993 Ford Crown VictoriaV8-4.6LService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1995 Ford Crown VictoriaV8-4.6LService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford Crown Victoria Steering wheel feels loose Inspection prices

A steering wheel that feels loose or has “play” in it prevents the driver form getting an accurate interpretation of how the wheels are turned. Any steering setup where you can move the wheel more than one to one and a half inches without moving the wheels is too lose and may have an issue. When the steering wheel feels loose it can be difficult from drivers to accurately know the position of the front wheels. This lack of responsiveness can be dangerous for drivers, especially in heavy traffic or winding roads.

How this system works:

The majority of modern vehicles use two different kinds of steering setup to help control the movement of the car. Rack and pinion steering is typically used on cars, small trucks and SUVs, while recirculating-ball steering is used on large SUVs and trucks. The similarities and differences in the two systems begin to manifest themselves when components fail, causing the steering wheel to feel loose.

Common reasons for this to happen:

  • Worn Tie Rods: Tie rods serve as the driver’s connection between the steering unit and the tires. Tie rods are present in both rack and pinion and recirculating ball setups. If tie rod ends become worn, they may cause the steering wheel to feel loose. A vehicle with worn tie rods may also squeak as the steering wheel is turned and be out of alignment.

  • Worn Pitman Arm: A pitman arm is only present in vehicles with recirculating-ball steering. The pitman arm connects a gear attached to the steering wheel to the steering rack itself. When the pitman arm becomes worn or the teeth in the gear connecting the pitman arm begin to slip, it can cause the steering wheel to feel loose.

  • Worn Ball Joint: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. A ball joint that is worn may cause the steering to feel loose and may also create a banging sound, especially when going over bumps.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the loose-feeling steering. The mechanic will then provide a detailed inspection report outlining the reason for the loose steering and the cost of any repairs that need to be made.

How it's done:

When the mechanic arrives, he or she will first lift the vehicle and remove the wheels so that they can better access the suspension and steering components. From here, the mechanic will be able to assess the reason why the steering has become loose.

If the mechanic suspects that worn tie rods may be the issue, he or she will inspect the tie rod for superficial damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

If the mechanic believes that the pitman arm has become worn, he or she will remove the pitman arm from the track bar and replace it with a new pitman arm. The mechanic should ensure that the new part is properly tightened.

If the mechanic suspects worn ball joints, he or she will remove the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

In the case of all repairs the mechanic will make sure that all the new parts have been installed correctly and are properly lubricated. In order to ensure that the steering is working properly, the mechanic may test drive the vehicle to check for excess play.

How important is this service?

A steering wheel that feels loose may not be giving an accurate indication of the front wheel’s position. Loose-feeling steering may also indicate that a problem has occurred with the steering unit or suspension. If you notice that the steering does not seem to be as responsive, you should stop driving the vehicle and have it inspected by a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(222)

Rating Summary
207
9
2
1
3
207
9
2
1
3

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
Ford Crown Victoria V8-4.6L - Oil Change - Sacramento, California
Very helpful.

Brian

19 years of experience
15 reviews
Brian
19 years of experience
Ford Crown Victoria V8-4.6L - Water Pump - Hampton, Georgia
Brian was great, he was very knowledgeable and honest. He was able to answer all of my questions. I felt that he was honest and gave me honest recommendations for the services I needed instead of just saying I needed services that I could do without in order for me to spend more money ( as a shop would do)

Jarius

21 years of experience
49 reviews
Jarius
21 years of experience
Ford Crown Victoria V8-4.6L - Pre-purchase Car Inspection - McLean, Virginia
Very punctual and professional of his work.

Jason

24 years of experience
57 reviews
Jason
24 years of experience
Ford Crown Victoria V8-4.6L - Wheel Bearings Replacement (Driver Side Rear, Passenger Side Rear) - Oklahoma City, Oklahoma
He was on time, had every tool and part that he needed and was fast and efficient with repairs. I have recommended him to several people that I know and hope that they use his service.

Excellent Rating

(222)

Rating Summary
207
9
2
1
3
207
9
2
1
3
Number of Ford Crown Victoria services completed
2442+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Toyota Sequoia
If If you need to haul a crowd and you want the power needed to haul all the toys as well, the 2012 Toyota Sequoia might be a perfect fit. While it doesn’t have the hauling capacity of some of...
Symptoms of a Bad or Failing Power Brake Booster
If you notice the brake pedal is difficult to push, causes the engine to stall, or takes longer to stop the car, the power brake booster is failing.
The #1 Guide to Oil Change Coupon Codes (Updated 12/2020)
The most extensive guide for navigating oil change coupons and discounts.

I have a Lexus RX 350 (2008). This morning it suddenly showed the engine light indicator and started vibrating.

The burning smell and vibrations could have been caused by the engine misfiring and making the exhaust come through the intake or there is an electrical issue that is burning on the exhaust system. I recommend seeking out a professional,...

Camaro seats

Hi there. You will most likely have difficulty with compatibility with these two years of Camaro. Although they might physically fit inside, they would probably require fabrication of the seat mounts to work correctly.

I just got my oil changed and now the car makes a clicking noise only while idle. What could that be?

Hi Taylor. Thanks for contacting us tonight. A clicking noise while idling after an oil change could be caused by one of two things. If the oil level is low, it can cause a lubrication problem on top of the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com