Ford Bronco Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(116)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(116)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Ford Bronco Valve Cover Gasket Replacement is $191 with $37 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Ford BroncoV8-5.0LService typeValve Cover Gasket ReplacementEstimate$725.70Shop/Dealer Price$805.19 - $1020.17
1990 Ford BroncoV8-5.0LService typeValve Cover Gasket ReplacementEstimate$860.16Shop/Dealer Price$936.54 - $1149.20
1995 Ford BroncoV8-5.0LService typeValve Cover Gasket ReplacementEstimate$947.75Shop/Dealer Price$1025.36 - $1238.92
1996 Ford BroncoV8-5.8LService typeValve Cover Gasket ReplacementEstimate$944.81Shop/Dealer Price$1021.67 - $1233.03
1993 Ford BroncoV8-5.8LService typeValve Cover Gasket ReplacementEstimate$696.63Shop/Dealer Price$774.61 - $986.80
1992 Ford BroncoL6-4.9LService typeValve Cover Gasket ReplacementEstimate$635.24Shop/Dealer Price$707.80 - $914.24
1992 Ford BroncoV8-5.0LService typeValve Cover Gasket ReplacementEstimate$699.57Shop/Dealer Price$774.05 - $985.28
1996 Ford BroncoV8-5.0LService typeValve Cover Gasket ReplacementEstimate$947.75Shop/Dealer Price$1025.35 - $1238.91
Show example Ford Bronco Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(116)

Rating Summary
102
5
1
3
5
102
5
1
3
5

Patrick

26 years of experience
1550 reviews
Patrick
26 years of experience
Bronco 1995 - Battery Terminal Ends - San Marcos, TX
Awesome! Awesome! Awesome!

Rafael

25 years of experience
65 reviews
Rafael
25 years of experience
Bronco 1996 - Power Steering Pump - Berkeley, CA
Rafael is the best mechanic I have come across in a while. Very nice and knowledgable He is A very good and honest mechanic.

Walter

43 years of experience
238 reviews
Walter
43 years of experience
Bronco 1996 - Car will not turn over - Broken Arrow, OK
Very friendly and very knowledgeable.

Peter

22 years of experience
479 reviews
Peter
22 years of experience
Bronco 1973 - Pre-purchase Car Inspection - West Hills, CA
Great Experience all around.

Excellent Rating

(116)

Rating Summary
102
5
1
3
5
102
5
1
3
5
Number of Ford Bronco services completed
1276+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

How Long Does a Fan Clutch Last?
One One of the most important parts within the cooling system of your vehicle is the fan clutch. It’s not a part that comes up often, as it’s usually pretty consistent. However, if this part should stop working the entire...
How to Replace an Air Fuel Ratio Sensor
The air fuel ratio sensor fails within a vehicle if the check engine light comes on. Poor engine performance results from oxygen sensor failure.
How Long Does an Oil Pump O Ring Last?
The The effort that goes into keeping a car in good shape is worth it. Taking the time to make sure that all of the vital components of your engine are working properly is an essential part of keeping your...

Clutch stays pressed down

The clutch works as part of a hydraulic system that is sensitive to leaks. Any leak along the lines, or failure of a seal in the clutch master cylinder, share the same symptoms. Have a mechanic confirm your situation and...

Brake light out

Many vehicles typically have 3 brake lights on the rear. One of the left, the right, and a high mounted center light. If all brake lights were out, you may consider a fuse or electrical switch. With one light out,...

VW Bora V5 2001 automatic dosnt shift gear from 3rd (manually shifted) until i hit the rpm over 6000 plus

This is common when the vehicle is low on transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or has a faulty transmission control solenoid. Automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car's computer activates a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com