Fiat 500L Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(62)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(62)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Fiat 500L Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Fiat 500LL4-1.4L TurboService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2016 Fiat 500LL4-1.4L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Fiat 500LL4-1.4L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
* Fiat 500LL4-1.4L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2014 Fiat 500LL4-1.4L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2020 Fiat 500LL4-1.4L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Fiat 500LL4-1.4L TurboService typeTransfer case fluid is dirty InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2017 Fiat 500LL4-1.4L TurboService typeTransfer case fluid is dirty InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Fiat 500L Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Fiat mechanics

Real customer reviews from Fiat owners like you.

Excellent Rating

(62)

Rating Summary
60
1
0
1
0
60
1
0
1
0

Brock

32 years of experience
50 reviews
Brock
32 years of experience
Fiat 500L L4-1.4L Turbo - Car is not starting Inspection - San Jose, California
Very prompt. Great communication. Explained things very clearly.

Lavell

28 years of experience
277 reviews
Lavell
28 years of experience
Fiat 500L L4-1.4L Turbo - Oil Change - Emeryville, California
Mr. Carradine was professional, conscience and meticulous. His work was efficient and tidy and he was very personable. I would be pleased to work with him in the future.

Steve

15 years of experience
150 reviews
Steve
15 years of experience
Fiat 500L L4-1.4L Turbo - Car is not starting - Bronxville, New York
Steve is an excellent mechanic, and very nice person. Very helpful.

Alex

22 years of experience
112 reviews
Alex
22 years of experience
Fiat 500L L4-1.4L Turbo - Brake Pads Replacement (Rear) - Scottsdale, Arizona
Alex is an asset to his profession

Excellent Rating

(62)

Rating Summary
60
1
0
1
0
60
1
0
1
0
Number of Fiat 500L services completed
682+
services done by our mechanics
TOTAL NUMBER OF EXPERT Fiat MECHANICS
300+
experts on our platform

Recent articles & questions

P0210 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 10
P0210 P0210 code definition Injector Circuit Malfunction - Cylinder 10 What the P0210 code means P0210 will be seen when the Engine Control Module (ECM) has found a malfunction within the cylinder 10 fuel injector circuit. The ECM constantly looks...
P0347 OBD-II Trouble Code: Camshaft Position Sensor A Circuit Low Input (Bank 2)
P0347 P0347 code definition The P0347 Trouble Code refers to an issue with the camshaft position sensor A where the circuit input in bank 2 is too low. What the P0347 code means This is a generic code regarding the...
B1931 OBD-II Trouble Code: Air Bag Crash Sensor 1 Feed/Return Circuit Failure
B1931 means there is an issue with Sensor 1 in the airbag deployment system, most likely due to a malfunctioning crash sensor.

Replacing halogen headlights with xenon or LED

The halogen headlights only require that they are plugged into the the proper socket to work. LED or xenon headlights would not work as they would require heavily modifying the lighting system. LED lights draw much less power than typical...

Have a Mitsubishi Lancer 30th anniversary 2011, making a rattling noise when accelerating and loss of power. There is occasional smoke.

Hi there. The rattling noise is the ignition system being too retard or advanced as the engine is accelerated. Check the camshaft position sensor and see if the sensor is connected and sending a voltage reference to the computer. To...

replaced power steering pump now res overflows when cap is put on

Anytime you replace the pump you will get air in the fluid and will need to let the engine idle for a few minutes and then let it sit with engine off for 5 minutes and repeat process until all...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com