Dodge Stealth Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Dodge Stealth Power Steering Pressure Hose Replacement is $429 with $289 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Dodge StealthV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$733.20Shop/Dealer Price$881.35 - $1317.70
1991 Dodge StealthV6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$805.21Shop/Dealer Price$971.85 - $1467.64
1992 Dodge StealthV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$724.19Shop/Dealer Price$870.60 - $1305.64
1993 Dodge StealthV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$724.19Shop/Dealer Price$870.60 - $1305.64
1996 Dodge StealthV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$724.19Shop/Dealer Price$872.07 - $1308.22
1996 Dodge StealthV6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$805.21Shop/Dealer Price$972.01 - $1467.93
1992 Dodge StealthV6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$805.21Shop/Dealer Price$971.89 - $1467.71
1994 Dodge StealthV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$724.19Shop/Dealer Price$870.60 - $1305.64
Show example Dodge Stealth Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Dodge Stealth V6-3.0L - Brake System Flush - Queen Creek, Arizona
Great service, on time!

Eliud

24 years of experience
312 reviews
Eliud
24 years of experience
Dodge Stealth V6-3.0L - Fuel Filter - Hoschton, Georgia
Eliud was great. He knew the quirks of working on my Stealth and was extremely knowledgeable, personable and I will be booking with him again of future Stealth services. Thank you Eliud and YourMechanic.com!

Omar

20 years of experience
43 reviews
Omar
20 years of experience
Dodge Stealth V6-3.0L - Battery - Pompano Beach, Florida
Excellent. Will use Omar again and will recommend him.

Jesse

18 years of experience
219 reviews
Jesse
18 years of experience
Dodge Stealth V6-3.0L - Starter - San Antonio, Texas
Extremely professional and knowledgeable, Jessie had my repair done in no time and was such a help! This was my first time using this website and I’ll definitely be back.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Dodge Stealth services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2011 Dodge Nitro
While While the Nitro shares some typical crossover features with competitors like the Equinox and even Dodge’s own Journey and Jeep Liberty, what it doesn’t share is typical conservative styling. This boxy beauty (or beast, depending upon your point of...
P0491 OBD-II Trouble Code: Secondary Air Injection System Insufficient Flow Bank 1
P0491 code means there is a problem on the side of the engine which contains cylinder #1 due to a bad air inlet, faulty wires, relay, pump, or fuse.
P3485 OBD-II Trouble Code: Cylinder 11 Exhaust Valve Control Malfunction
P3485 means an issue with cylinder 11’s exhaust valve control circuit which causes sluggish acceleration and decreased fuel economy.

Car overheated and then shut down

Hello. Though there are many places that coolant can leak on this vehicle. The most common cause of a fast leak is a failing water pump or a crack in the radiator. I have also seen a lot of coolant...

When shifting, loud bang-type noise

Hi there. A faulty motor mount could cause this type of noise on your 2002 Mercedes Benz E430. Another thing to consider is a center driveshaft bearing assembly. It may shift upward in its housing if the rubber bearing mount...

2003 Nissan Frontier manual - engaging reverse stalls engine

Hello - this problem sounds as though your shift linkage is engaging BOTH reverse and a forward gear at the same time - effectively locking up the transmission. This would explain why the engine stalls when this occurs, but works...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com