Dodge Grand Caravan Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Dodge Grand Caravan Valve Cover Gasket Replacement is $170 with $30 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Dodge Grand CaravanV6-3.8LService typeValve Cover Gasket ReplacementEstimate$840.70Shop/Dealer Price$945.43 - $1235.30
2005 Dodge Grand CaravanV6-3.3LService typeValve Cover Gasket ReplacementEstimate$737.99Shop/Dealer Price$818.50 - $1047.64
2011 Dodge Grand CaravanV6-3.6LService typeValve Cover Gasket ReplacementEstimate$836.14Shop/Dealer Price$965.50 - $1343.98
1996 Dodge Grand CaravanL4-2.4LService typeValve Cover Gasket ReplacementEstimate$257.89Shop/Dealer Price$287.72 - $373.04
1995 Dodge Grand CaravanV6-3.8LService typeValve Cover Gasket ReplacementEstimate$842.87Shop/Dealer Price$947.45 - $1237.22
2009 Dodge Grand CaravanV6-3.3LService typeValve Cover Gasket ReplacementEstimate$592.00Shop/Dealer Price$671.00 - $899.01
2001 Dodge Grand CaravanV6-3.3LService typeValve Cover Gasket ReplacementEstimate$815.79Shop/Dealer Price$915.87 - $1203.45
2013 Dodge Grand CaravanV6-3.6LService typeValve Cover Gasket ReplacementEstimate$836.14Shop/Dealer Price$965.50 - $1343.97
Show example Dodge Grand Caravan Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0

Keith

13 years of experience
394 reviews
Keith
13 years of experience
Grand Caravan 2011 - Valve Cover Gasket - Davenport, FL
very good person.

Joseph

0 years of experience
646 reviews
Joseph
0 years of experience
Grand Caravan 2006 - Valve Cover Gasket - Salt Lake City, UT
Fantastic. Showed up on time, explained what he did and what he found, did what was necessary to fix the problem, and let me know of any other issues that he saw during his inspection. I am so glad I found these guys!

Larry

15 years of experience
23 reviews
Larry
15 years of experience
Grand Caravan 2014 - Alternator - Pickerington, OH
Larry professionally inspected and repaired my issue and kept me informed of his progress along the way.

Colby

13 years of experience
34 reviews
Colby
13 years of experience
Grand Caravan 2008 - Heater Hoses - Denver, CO
Not only polite he save us $$$ thank you sir!!!

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0
Number of Dodge Grand Caravan Valve Cover Gasket Replacement services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

What are the Car Pool Rules in Kansas?
While While many people think of Kansas as being a state that’s primarily rural, there are lots of cities and freeways, and lots of rules and regulations (https://www.yourmechanic.com/article/rules-of-the-road-for-kansas-drivers-by-valerie-mellema) that go with them. Kansas drivers heavily rely on the state’s many...
P0748 OBD-II Trouble Code: Pressure Control Solenoid Electrical
P0748 code means fluid pressure does not match the expected measurements due to low, dirty or contaminated transmission fluid, or hydraulic clogs.
A Buyer’s Guide to the 2012 Lexus LS 600h L
The The “h” stands for hybrid, and while you might hope to get greatly improved gas mileage for your effort to go green, that shouldn’t be your motivation for buying this model. The 600h L offers a mere 1 mpg...

Brake lights not working in a 2003 Chevrolet Silverado 1500

The first thing to check for is any blown fuses for the brake lights. The brake light switch gets power from the a fuse and then sends power into the brake light fuse and the turn signal module. Power from...

SUV experienced low acceleration and loss of power

Hello. There are a few possible problems that might explain the problems you are experiencing with your 2009 Saturn Outlook. There could be a problem with the catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement) in that it may be clogged. The catalytic converter is...

Can an alternator be damaged when replacing the water pump?

The coolant that may have leaked from the water pump could have gotten into the alternator which could short it out. You should test the alternator and recharge the battery. You can also have a qualified mobile technician come to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com