Dodge 2000 GTX Clutch Slave Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Clutch Slave Cylinder Replacement Service

How much does a Clutch Slave Cylinder Replacement cost?

On average, the cost for a Dodge 2000 GTX Clutch Slave Cylinder Replacement is $302 with $162 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Dodge 2000 GTXL4-2.0LService typeClutch Slave Cylinder ReplacementEstimate$504.84Shop/Dealer Price$595.90 - $860.98
Show example Dodge 2000 GTX Clutch Slave Cylinder Replacement prices

What is the Clutch Slave Cylinder all about?

A clutch master cylinder contains a reservoir that stores the brake fluid. It is connected to the clutch slave cylinder through hoses. When you push the clutch pedal, brake fluid flows from the clutch master cylinder to the slave cylinder, applying the pressure necessary to move (engage) the clutch. It has internal and external seals that can fail. If the external seals wear out, the clutch master cylinder will leak brake fluid, reducing the amount of fluid in the car and causing the clutch to malfunction. You may also find leaked brake fluid down by the clutch pedal (inside the car). If the internal seals wear out, the clutch fluid will continue to circulate inside instead of being directed to the slave cylinder. In that case, the clutch pedal will go all the way to the floor when you apply the clutch.

Keep in mind:

Whenever the clutch master cylinder is replaced, it is recommended to replace the slave cylinder (connected to the master cylinder through the hose). When the master cylinder goes bad, it is extremely common for the slave cylinder to follow suit. Note some clutch slave cylinders are installed inside the transmission. To replace this type of slave cylinder the transmission has to be removed.

How it's done:

  • Inspect clutch master cylinder and slave cylinder.
  • Check the condition of brake fluid.
  • Inspect the operation of clutch pedal.
  • Remove and replace clutch master cylinder and slave cylinder.
  • Bleed all air from the master cylinder.
  • Test drive the vehicle.

Our recommendation:

Usually during an oil change, mechanics check the amount of brake fluid. If you feel a change in the way the clutch pedal feels (softer pedals) when stepping on it, you should have a mechanic inspect the clutch master cylinder and hose. Clutch fluid should be changed every 24,000 miles.

What common symptoms indicate you may need to replace the Clutch Slave Cylinder?

  • Clutch pedals goes all the way to the floor.
  • Brake fluid leaking around the clutch pedal.
  • Not able to change gears.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Keith

31 years of experience
76 reviews
Keith
31 years of experience
Dodge Ram 1500 V6-3.7L - Clutch Slave Cylinder - El Mirage, Arizona
Keith is very professional and knowledgeable.

Robert

24 years of experience
253 reviews
Robert
24 years of experience
Dodge Ram 1500 V6-3.7L - Clutch Slave Cylinder - Spring, Texas
Professional and courtesy did a splendid job nice work

David

43 years of experience
220 reviews
David
43 years of experience
Dodge Ram 1500 V8-5.2L - Clutch Slave Cylinder - Atlanta, Georgia

Michael

23 years of experience
77 reviews
Michael
23 years of experience
Dodge Dakota V8-5.2L - Clutch Slave Cylinder - New Port Richey, Florida
Awesome experience.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Dodge Clutch Slave Cylinder Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

P0332 OBD-II Trouble Code: Knock Sensor 2 Circuit Low Input (Bank 2)
Trouble code P0332 means the PCM is receiving a reading that the knock sensor is too low, which can result in higher emissions and engine problems.
How to Register a Car in Missouri
In In order to drive legally on the Missouri roadways, you will have to get your vehicle registered with the Department of Revenue. If you are just moving to this great state, then you will have 30 days to get...
Disabled Driver Laws and Permits in Wyoming
If If you live in the State of Wyoming, and you have a disability, then you can get special permits that will allow you to park in special spots and also enjoy other privileges that are not available to you...

Transmission does not shift right, really slow

The A/C drain water may be running down and getting into the transmission solenoid shift connector, causing erratic shifting issues and giving check transmission codes. Ford has come out with Technical Service Bulletin (TSB) 9-22-15, dated 11/16/2009. The TSB instructs...

How do I use the max air conditioning?

The max air conditioning feature is an extra powerful version of the air conditioning, and can be used in extremely hot weather conditions, or when you need to cool the car in a hurry. To use the max air conditioning...

My vehicle was running great. After I had the oil changed it was cutting out and had to replace my vvt solenoids. Now overheating?

A oil change cannot cause any of the problems you are having unless the incorrect viscosity too thick of oil was put in. Your engine calls for 5w20 motor oil and synthetic oil is recommended. If too thick oil is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com