Chrysler Voyager Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(35)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(35)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Chrysler Voyager Power Steering Pressure Hose Replacement is $203 with $63 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Chrysler VoyagerV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$314.22Shop/Dealer Price$357.63 - $479.74
2001 Chrysler VoyagerV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$327.15Shop/Dealer Price$374.27 - $511.52
2003 Chrysler VoyagerV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$327.15Shop/Dealer Price$374.30 - $511.56
2002 Chrysler VoyagerL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$272.15Shop/Dealer Price$305.55 - $401.56
2002 Chrysler VoyagerV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$327.15Shop/Dealer Price$375.77 - $514.14
2000 Chrysler VoyagerL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$275.69Shop/Dealer Price$310.11 - $408.89
2000 Chrysler VoyagerV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$305.21Shop/Dealer Price$346.89 - $467.71
2001 Chrysler VoyagerL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$272.15Shop/Dealer Price$305.55 - $401.56
Show example Chrysler Voyager Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(35)

Rating Summary
33
2
0
0
0
33
2
0
0
0

Richard

22 years of experience
237 reviews
Richard
22 years of experience
Chrysler Voyager V6-3.0L - Fuel Pump - Fort Myers, Florida
Richard was punctual, knowledgeable, professional and courteous!

Gilbert

34 years of experience
10 reviews
Gilbert
34 years of experience
Chrysler Voyager L4-2.4L - Car is stalling Inspection - Chandler, Arizona
Came early, very knowledgeable and helpful.

Joel

22 years of experience
987 reviews
Joel
22 years of experience
Chrysler Voyager V6-3.3L - Cooling/Radiator Fan Motor - Jacksonville, Florida
First class auto tech with 20+ yrs of experience handle job to perfection changing out radiator fan. Highly impressed.

Christopher

18 years of experience
32 reviews
Christopher
18 years of experience
Chrysler Voyager V6-3.3L - Water Pump - Harrisburg, Pennsylvania
Everything went well.Very satisfied with work that was done and the price.Christopher seems to be very knowledgeable.Would recommend to anybody who dont have time to take car to garage.

Excellent Rating

(35)

Rating Summary
33
2
0
0
0
33
2
0
0
0
Number of Chrysler Voyager services completed
385+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Get a Used Engine
The engine (https://www.yourmechanic.com/article/how-a-modern-engine-works) under the hood is the most important component of a vehicle. Without the engine, your car cannot run and is of little value to you. If you have been in an accident, or neglected your engine to...
How Long Does a Windshield Washer Tubes Last?
Keeping Keeping a windshield clean is a big part of staying safe while on the roadways. Driving in icy or rainy conditions is not easy, especially if there is an issue with your washer tubes. These tubes are what helps...
Top Automotive News & Stories: August 27-September 2
This week's top auto news: Bosch water injection, new Cadillac cars, White House addresses traffic fatalities, electronic recall notices, and more.

Clutch blown out

With Acura cars, there are several common components that can have a catastrophic failure due to age. The igniter, ignition coil, main relay (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-main-relay-computer-fuel-system), and distributor rotors are all common components. When these components fail, they typically just stop working...

Something is grinding when I stop

It is possible that your dust shield behind the rotor is coming in contact with the rotor sometimes. I would recommend to use a small screwdriver and try to pry the dust shield away from the rotor anywhere that it...

Help to diagnose low MPG and high oil consumption.

A few different things may contribute to oil consumption and poor fuel economy. Typically, high oil consumption is related to worn piston rings or worn out valve guide seals. In your case, it is unlikely this is related to worn...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com