Chrysler Neon Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(112)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(112)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Chrysler Neon Serpentine/Drive Belt Replacement is $189 with $49 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Chrysler NeonL4-2.0LService typeSerpentine/Drive Belt ReplacementEstimate$253.80Shop/Dealer Price$282.10 - $358.90
2002 Chrysler NeonL4-2.0LService typeSerpentine/Drive Belt ReplacementEstimate$244.79Shop/Dealer Price$271.32 - $346.80
2001 Chrysler NeonL4-2.0LService typeSerpentine/Drive Belt ReplacementEstimate$244.79Shop/Dealer Price$271.35 - $346.84
Show example Chrysler Neon Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(112)

Rating Summary
111
1
0
0
0
111
1
0
0
0

Mark

12 years of experience
349 reviews
Mark
12 years of experience
Chrysler Neon L4-2.0L - Oil Change - Fremont, California

Chris

9 years of experience
23 reviews
Chris
9 years of experience
Chrysler Sebring V6-2.7L - Serpentine/Drive Belt - Villa Rica, Georgia
Got it all taken care of but also found something that others have not been able to locate. Have to get that air conditioner leak fixed next.

Joseph

28 years of experience
578 reviews
Joseph
28 years of experience
Chrysler PT Cruiser L4-2.4L - Serpentine/Drive Belt - Houston, Texas
Professional and simply down to earth dude. Arrived 30 minutes early and was through before I had to go to work. This is no hype!!! Got great service and was very affordable. Will definitely request Joseph again.

Terry

27 years of experience
326 reviews
Terry
27 years of experience
Chrysler Aspen V8-4.7L - Serpentine/Drive Belt - Gilbert, Arizona
Terry was perfect! He showed up right on time, finished the job in exactly the time quoted, and cleaned up the area. Couldn’t have been more pleased!

Excellent Rating

(112)

Rating Summary
111
1
0
0
0
111
1
0
0
0
Number of Chrysler Serpentine/Drive Belt Replacement services completed
1232+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Daytime Running Lamp Module
If your daytime running lights do not come on, stay on when the car is off, or produce a burning smell, you may have to replace their module.
How to Troubleshoot a Gas Cap That Won't Come Off
Gas caps stick and won't come off when the gas cap is broken, there's a mechanical defect in the gas tank filler neck, or gas cap is locked.
How to Replace a Lost or Stolen Car Title in Minnesota
If If you are fortunate to own your vehicle, the proof you have of this is your car title. Perhaps you’ve been thinking about selling your car, maybe transferring the ownership to your teenaged child, or then again maybe you...

BlueTooth Announcing Texts

I would recommend looking in your 2014 Dodge Dart's owner's manual to see if there are any bluetooth programming options available to you. If so, I would just go into the settings menu and change the bluetooth system to not...

I was told that my crankshaft pulley is wobbling and i looked up how to replace it myself but would something get messed up? 1996 Honda Civic

Hi there - this task requires a few specialized tools in order to do the job correctly The bolt holding the crankshaft harmonic balancer (https://www.yourmechanic.com/question/how-do-i-change-an-external-harmonic-balancer-by-randy-p) on requires approximately 300 lb ft of torque to remove, and reinstall. The correct tools...

2004 Chevrolet Impala SS Security Light

Either the key fob remote's battery is going out causing the immobilizer system to trip the security or the immobilizer system control is not responding. I recommend replacing the battery (https://www.yourmechanic.com/services/battery-replacement) in the key fob remote and programming the remote...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com