Chrysler Dynasty Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,101)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,101)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Chrysler Dynasty Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Chrysler DynastyL4-2.5LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 Chrysler DynastyL4-2.5LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Chrysler DynastyL4-2.5LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Chrysler DynastyV6-3.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1988 Chrysler DynastyV6-3.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1991 Chrysler DynastyL4-2.5LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1993 Chrysler DynastyV6-3.3LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1991 Chrysler DynastyV6-3.3LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chrysler Dynasty Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(5,101)

Rating Summary
4,723
197
36
34
111
4,723
197
36
34
111

Robert

20 years of experience
1092 reviews
Robert
20 years of experience
Chrysler Dynasty V6-3.3L - Oil Pan - Broomfield, Colorado
He is very down to earth and willing to do whatever it takes to get the job done. I'm very greatful for all the hard work he put in on such a cold day.

Collins

12 years of experience
493 reviews
Collins
12 years of experience
Chrysler 300M V6-3.5L - Headlight Bulb Replacement (Driver Side Low Beam, Passenger Side Low Beam) - Atlanta, Georgia
On time, professional and completed job without issues.

Blake

13 years of experience
114 reviews
Blake
13 years of experience
Chrysler Sebring L4-2.4L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Morrisville, North Carolina
Blake is always on time and very courteous. He's honest and will only do what is necessary to get the job done. He always goes out of his way to explain what is going on. He is a class act. Any car is in good hands with Blake.

Ralph

38 years of experience
186 reviews
Ralph
38 years of experience
Chrysler 200 V6-3.6L - Oil Change - Tacoma, Washington
Great mechanic. Very knowledgeable about vehicle repair and how to do it properly.

Excellent Rating

(5,101)

Rating Summary
4,723
197
36
34
111
4,723
197
36
34
111
Number of Chrysler services completed
56111+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

How Exhaust Systems Work
It It all starts in the engine In order to understand how the exhaust of a vehicle works, there must be a basic understanding of the engine as a whole. The internal combustion engine in its simplest form is a...
P0078 OBD-II Trouble Code: Exhaust Valve Control Solenoid Circuit (Bank 1)
P0078 P0078 code definition Exhaust Valve Control Solenoid Circuit (Bank 1) What the P0078 code means P0078 is a generic OBD2 code indicating that the Engine Control Module (ECM) has tried to control the Bank 1 exhaust valve control solenoid,...
How to Use Engine Block Sealer to Repair a Head Gasket Leak
Head gasket leaks occur when engines overheat and can be costly to repair. Engine block sealer can be a quick and easy alternative for minor cases.

my drivers side low beam is not working

The connector for the head light bulbs should be checked to see if it has any brown heat damage. If it does, then it will need to be replaced with a new connector from the GM dealer. Make sure you...

Car won't start. It cranks but won't start.

Just a little note, the water pump is driven by the timing chain (https://www.yourmechanic.com/services/timing-chain-replacement) and not the fuel pump. Your fuel pump is in the fuel tank and may be the cause of the no start. If you have a...

Which fuse is electronically controlled with the iac , becuase i didnt see one fuse that said anything about the iac valveand when

Unless there is something visible like a vacuum leak through a cracked tube, to diagnose fluctuating idle speed a scan tool is essential to directly observe engine operating parameters. With regard to the idle air control valve, if you apply...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com