Chrysler Dynasty Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(404)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(404)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Chrysler Dynasty Brake Pad Replacement is $223 with $83 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Chrysler DynastyL4-2.5LService typeBrake Pads - Front ReplacementEstimate$358.72Shop/Dealer Price$406.22 - $539.00
1990 Chrysler DynastyV6-3.3LService typeBrake Pads - Rear ReplacementEstimate$384.23Shop/Dealer Price$438.69 - $597.12
1992 Chrysler DynastyV6-3.3LService typeBrake Pads - Rear ReplacementEstimate$384.23Shop/Dealer Price$438.72 - $597.17
1990 Chrysler DynastyL4-2.5LService typeBrake Pads - Front ReplacementEstimate$347.91Shop/Dealer Price$393.32 - $524.53
1992 Chrysler DynastyL4-2.5LService typeBrake Pads - Rear ReplacementEstimate$347.91Shop/Dealer Price$395.09 - $527.62
1990 Chrysler DynastyV6-3.0LService typeBrake Pads - Rear ReplacementEstimate$347.91Shop/Dealer Price$393.49 - $524.82
1991 Chrysler DynastyV6-3.3LService typeBrake Pads - Rear ReplacementEstimate$384.23Shop/Dealer Price$438.74 - $597.20
1993 Chrysler DynastyL4-2.5LService typeBrake Pads - Front ReplacementEstimate$318.71Shop/Dealer Price$363.75 - $494.68
Show example Chrysler Dynasty Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(404)

Rating Summary
384
15
1
2
2
384
15
1
2
2

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Chrysler Dynasty V6-3.3L - Oil Pan - Broomfield, Colorado
He is very down to earth and willing to do whatever it takes to get the job done. I'm very greatful for all the hard work he put in on such a cold day.

Tabitha

18 years of experience
379 reviews
Tabitha
18 years of experience
Chrysler PT Cruiser L4-2.4L - Brake Pads Replacement (Rear) - San Diego, California
Tabitha is personable, professional, and very knowledgeable. I would use her services again. She left me feeling like she knew my car and what it needed next.

Casey

17 years of experience
44 reviews
Casey
17 years of experience
Chrysler 200 L4-2.4L - Brake Pads Replacement (Front) - Humble, Texas
Casey is amazing. He is right on time or early. He came out every time i needed to make sure my car got all the service it needed from the front brakes, back brakes, spark plugs, and actuators.

Warren

16 years of experience
64 reviews
Warren
16 years of experience
Chrysler 200 L4-2.4L - Brake Pads Replacement (Front) - Houston, Texas
Warren was prompt and very personable. His analysis of other issues and necessity of repairs was much appreciated. I will be booking him for all my future repairs.

Excellent Rating

(404)

Rating Summary
384
15
1
2
2
384
15
1
2
2
Number of Chrysler Brake Pad Replacement services completed
4444+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

P3411 OBD-II Trouble Code: Cylinder 2 Deactivation/Intake Valve Control Circuit Low
P3411 means the system detected a problem with vehicle sensors due to electrical problems, bad solenoids, low oil pressure, or mechanical issues.
How to Diagnose and Repair Noisy Brakes
Squeaky car brakes are hard to drive with. If your car brakes are making noise, check the brake pads and brake rotors to see if they are worn down.
The Guide to Right-of-Way Laws in Illinois
In In Illinois, right-of-way laws are designed to facilitate the smooth movement of traffic and ensure the safety of both motorists and pedestrians. When you consider right-of-way laws, you can see that they are founded by common sense and courtesy....

dash and console lights out - 2005 Chevy Cobalt

Try to adjust the dashboard light's rheostat to see if it is turned all the way dim in such a way that you cannot see the lights. If the rheostat is turned up and it the lights are still not...

The abs block does not let fluid to the rear brake lines

Hello, when bleeding brake with an ABS system you will need a scan tool to open the passages in the ABS module. This is part of the brake bleeding process. If you'd like, a certified Your Mechanic Technician can...

The Diver side panel under the door is lose

Hi there. In order to help provide some tips or ideas, we need to know the make, model and year of your vehicle, along with some more specifics about the actual parts that are loose. If it's the floor board,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com