Chrysler Crossfire Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(99)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(99)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Chrysler Crossfire Serpentine/Drive Belt Replacement is $203 with $63 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Chrysler CrossfireV6-3.2L TurboService typeSerpentine/Drive Belt ReplacementEstimate$362.96Shop/Dealer Price$418.55 - $577.22
2006 Chrysler CrossfireV6-3.2LService typeSerpentine/Drive Belt ReplacementEstimate$272.37Shop/Dealer Price$305.80 - $401.96
2004 Chrysler CrossfireV6-3.2LService typeSerpentine/Drive Belt ReplacementEstimate$272.37Shop/Dealer Price$305.82 - $402.00
2005 Chrysler CrossfireV6-3.2L TurboService typeSerpentine/Drive Belt ReplacementEstimate$353.95Shop/Dealer Price$407.80 - $565.16
2007 Chrysler CrossfireV6-3.2LService typeSerpentine/Drive Belt ReplacementEstimate$272.37Shop/Dealer Price$307.30 - $404.58
2008 Chrysler CrossfireV6-3.2LService typeSerpentine/Drive Belt ReplacementEstimate$272.37Shop/Dealer Price$305.96 - $402.25
2005 Chrysler CrossfireV6-3.2LService typeSerpentine/Drive Belt ReplacementEstimate$272.37Shop/Dealer Price$305.84 - $402.03
Show example Chrysler Crossfire Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(99)

Rating Summary
90
5
2
0
2
90
5
2
0
2

Robert

14 years of experience
65 reviews
Robert
14 years of experience
Crossfire 2006 - Car idle is rough - Phoenix, AZ
Robert was very professional, an absolute joy! Highly recommended!

Robert

14 years of experience
65 reviews
Robert
14 years of experience
Crossfire 2006 - Car is overheating - Phoenix, AZ
Robert was very professional, an absolute joy! Highly recommended!

Petar

5 years of experience
21 reviews
Petar
5 years of experience
Crossfire 2004 - Car is not starting - Mercer Island, WA
Petar is very efficient and good. he know cars and Im was very impressed with him

Rusty

0 years of experience
532 reviews
Rusty
0 years of experience
Crossfire 2007 - Power Steering Fluid Service - Mansfield, TX
Very happy with the service visit. I greatly appreciate the way that Rusty explains everything about the mechanical condition of my car and what he is doing to keep it running.

Excellent Rating

(99)

Rating Summary
90
5
2
0
2
90
5
2
0
2
Number of Chrysler Crossfire services completed
1089+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Buy a New Car
Buying Buying a new car is a big investment, often second only to purchasing a home. It’s important to make the best choice based on your specific financial situation. If you follow some helpful tips, you will make an informed...
How to Flush Car Brake Fluid
Air or water in the brake fluid causes spongy brakes and reduces braking efficiency. Perform a brake fluid flush to remove all contaminated fluid.
How to Keep Your Car Running Well When It’s Hot Outside
Your Your car is affected considerably by the environment around it, including: Cold, freezing temperatures Dry, arid climates Hot temperatures and direct sunlight Precipitation in the form of rain or snow If your car is exposed to moisture all the...

Fuel Pump shuts off when filling

This is likely related to your EVAP emissions system and something called a purge solenoid. The EVAP system prevents fuel vapors from the fuel tank from escaping into the atmosphere. The EVAP system collects and temporarily stores the fuel vapors...

What else can cause an over heating engine. .

Overheating in stop and go traffic can be due to non functioning electric radiator cooling fans. A poorly functioning water pump can be a cause, too, for example if the drive belt is not tight enough. If the car is...

Ok it’s making a whining noise now while it is running. It was whining after I drove it for like 45 minutes but now it’s constant. And when I looked under the hood I noticed that my harmonic balancer pulley shakes or becomes misaligned almost (it doesn’t ride straight and true like the other pulleys)

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com