Chevrolet Sprint Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(38)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(38)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Chevrolet Sprint Fuel Injector Replacement is $752 with $598 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Chevrolet SprintL3-1.0L TurboService typeFuel Injector ReplacementEstimate$1372.80Shop/Dealer Price$1677.34 - $2582.03
1992 Chevrolet SprintL3-1.0L TurboService typeFuel Injector ReplacementEstimate$1362.89Shop/Dealer Price$1665.48 - $2568.72
1991 Chevrolet SprintL3-1.0LService typeFuel Injector ReplacementEstimate$2085.11Shop/Dealer Price$2568.28 - $4013.21
1990 Chevrolet SprintL3-1.0LService typeFuel Injector ReplacementEstimate$2085.11Shop/Dealer Price$2568.28 - $4013.20
1992 Chevrolet SprintL3-1.0LService typeFuel Injector ReplacementEstimate$2085.11Shop/Dealer Price$2569.90 - $4016.04
1990 Chevrolet SprintL3-1.0L TurboService typeFuel Injector ReplacementEstimate$1362.89Shop/Dealer Price$1665.66 - $2569.04
Show example Chevrolet Sprint Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(38)

Rating Summary
37
1
0
0
0
37
1
0
0
0

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Chevrolet Express 1500 V8-5.7L - Fuel Injector - Scottsdale, Arizona
Very knowledgeable about my vehicle. Very confident in his analysis of problem. Great attention to detail

Peter

28 years of experience
86 reviews
Peter
28 years of experience
Chevrolet Venture V6-3.4L - Fuel Injector - Selma, California
Thanks Peter for the work that you did on my car really appreciate your kindness and service

Steven

17 years of experience
97 reviews
Steven
17 years of experience
Chevrolet Tahoe V8-5.7L - Fuel Injector - Sacramento, California
I’m aggressively happy with the results, price and just how everything went.

Corey

13 years of experience
511 reviews
Corey
13 years of experience
Chevrolet Avalanche V8-5.3L - Fuel Injector - Charlotte, North Carolina
Corey was very open, honest and attentive during my service.

Excellent Rating

(38)

Rating Summary
37
1
0
0
0
37
1
0
0
0
Number of Chevrolet Fuel Injector Replacement services completed
418+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Ignition Relay
Common signs include the car stalling or not starting, a dead battery, and a burned relay.
Is It Okay to Drive a Vehicle With Windows that Won’t Roll Up or Down?
When When you drive, you need to roll down your window for many different reasons. You might need to: Speak with a peace officer at a traffic stop Order at a drive-thru window Open the window for air flow Open...
How to Fuel a Race Car
Fueling a race car depends on the type, whether NASCAR or Indycar. The process requires a special fueling device, precision, and speed.

Gas pedal not working!!!

Hi there, thanks for writing in about your 2006 Ford Explorer. Both the throttle body on the engine and the accelerator pedal inside of the vehicle have sensors (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) on them to tell the computer which positions they are in....

Isuzu kb 280.sound that appear to be from engine.but worsened when we removed the gear box to replace rear oil main oil seal.after

Hi there. The sound that you are hearing is the clutch clicking and not engaging. One of the pressure plate springs has broke causing the noise to appear under a load. This could have happened the last time that the...

Key light is on and car starts but dash lights won't come on

Hi Aaron. Thanks for contacting us today. We're a bit confused by the issues you're having based on the input we've received. If the vehicle will start, but when you shift into gear the car doesn't move, it's likely that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com