Chevrolet Silverado 1500 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Chevrolet Silverado 1500 Power Steering Pump Replacement is $295 with $113 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Chevrolet Silverado 1500V8-4.8LService typePower Steering Pump ReplacementEstimate$535.74Shop/Dealer Price$599.38 - $774.08
2017 Chevrolet Silverado 1500V8-5.3L HybridService typePower Steering Pump ReplacementEstimate$843.16Shop/Dealer Price$998.49 - $1457.88
2009 Chevrolet Silverado 1500V8-6.0L HybridService typePower Steering Pump ReplacementEstimate$497.46Shop/Dealer Price$566.41 - $766.55
2008 Chevrolet Silverado 1500V6-4.3LService typePower Steering Pump ReplacementEstimate$589.02Shop/Dealer Price$653.13 - $835.46
2009 Chevrolet Silverado 1500V8-5.3LService typePower Steering Pump ReplacementEstimate$472.22Shop/Dealer Price$537.21 - $720.19
2000 Chevrolet Silverado 1500V8-5.3LService typePower Steering Pump ReplacementEstimate$459.32Shop/Dealer Price$518.96 - $690.66
2006 Chevrolet Silverado 1500V8-5.3LService typePower Steering Pump ReplacementEstimate$517.72Shop/Dealer Price$577.90 - $750.02
2000 Chevrolet Silverado 1500V6-4.3LService typePower Steering Pump ReplacementEstimate$415.53Shop/Dealer Price$474.38 - $645.49
Show example Chevrolet Silverado 1500 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Michael

20 years of experience
391 reviews
Michael
20 years of experience
Silverado 1500 2011 - Power Steering Pump - Gilbert, AZ
Great

Luis

20 years of experience
112 reviews
Luis
20 years of experience
Silverado 1500 2008 - Power Steering Pump - Austin, TX
Very knowledgeable, friendly an honest

Phillip

16 years of experience
307 reviews
Phillip
16 years of experience
Silverado 1500 2001 - Power Steering Pump - Sacramento, CA
Very knowledgeable and skilled. Great attitude and much better customer service than you would expect to find in a field mechanic. Phillip is a true professional.

Patrick

26 years of experience
1550 reviews
Patrick
26 years of experience
Silverado 1500 2009 - Power Steering Pump - Austin, TX
great job!

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Chevrolet Silverado 1500 Power Steering Pump Replacement services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Understanding the Different Types of Oil Filters
The The motor oil that you put into your engine, along with its additives, works to absorb and hold organic and inorganic contaminants. Organic contaminants can include bacteria, bugs, and oxidized oil. Inorganic impurities can include metallic particles, wearing off...
P0152 OBD-II Trouble Code: O2 Sensor Circuit High Voltage (Bank 2 Sensor 1)
P0152 trouble code definition O2 Sensor Circuit High Voltage (Bank 2 Sensor 1) What the P0152 code means P0152 is the OBD-II...
How to Buy Good Quality Seat Covers
Kids, Kids, pets, even you – nearly everything that enters your vehicle is tough on your car seats. We live in our cars these days, and everything from sodas from lunch to glitter and mud are going to stick into...

Car making loud noise and barely running.

This sounds like it could be a serious problem for your car. My first recommendation would be to have this vehicle inspected (https://www.yourmechanic.com/services/car-is-making-a-noise-inspection) by a certified mechanic as soon as possible to avoid these symptoms turning into larger problems. The...

2005 Nissan Pathfinder won't accelerate

While there can be a few reasons as to why your Nissan Pathfinder is giving these accelerate problems, from my experience the first place I would start investigating is the throttle body. The throttle body in your Pathfinder is electronically...

Car sounds like old bed spring

Struts or any number of suspension components can cause a squeaking noise over bumps or when turning. Typically, components like ball joints can be the cause. In most modern vehicles, components like ball joints are greased and sealed at the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com