Chevrolet Silverado 1500 HD Classic Brake Light Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Brake Light Switch Replacement Service

How much does a Brake Light Switch Replacement cost?

On average, the cost for a Chevrolet Silverado 1500 HD Classic Brake Light Switch Replacement is $170 with $30 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Chevrolet Silverado 1500 HD ClassicV8-6.0LService typeBrake Light Switch ReplacementEstimate$214.46Shop/Dealer Price$232.93 - $280.22
Show example Chevrolet Silverado 1500 HD Classic Brake Light Switch Replacement prices

What is the brake light switch and how does it work?

The brake light switch is a mechanical switch activated when you press the brake pedal. The switch has a plunger in it that contacts a lever in the brake pedal assembly. As that plunger is depressed when you push on the brake pedal, the contacts in the brake light switch closed and voltage flows to the brake lights — turning them on. The brake light switch is also in the circuit that controls the cruise control disengagement and the shift interlock safety feature installed on all newer cars. Failure of the brake light switch occurs due to wear on the internal electrical contacts in the switch, poor switch terminal connections, maladjustment of the switch, or damage to the brake pedal assembly.

When to consider replacing the brake light switch?

  • No brake lights. If depressing the brake pedal does not cause any of the brake lights to illuminate, the continuity of the switch will be tested. If only one brake light is out, then the issue is not the switch but rather the bulb, bulb socket or brake light circuit integrity.
  • Unable to shift out of park. The brake light switch is also wired into the shift interlock mechanism. If you are unable to shift out of park, with your foot on the brake, check to see if the brake lights will illuminate as you push the pedal. If they do not illuminate, failure of the brake light switch may be the cause of the no shift.
  • Intermittent operation of the brake lights or late operation. The brake light switch has to be in the proper position, and work consistently if the brake lights are to come on the instant you press the brake pedal. The switch can sometimes require adjustment, or the contacts may degrade, causing inconsistent operation of the switch.

How do mechanics replace the brake light switch?

  • The switch is first tested using a multimeter, including the terminal contacts to the switch, to determine if it is faulty. If the switch is functioning, the entire circuit must be tested to determine the cause of no brake lights.
  • Should the switch be judged defective, the switch is unthreaded from the mounting boss near the brake pedal assembly.
  • The new switch is threaded in and locked with an appropriate locknut once the new switch is properly adjusted.
  • The operation of the switch is tested to ensure instant illumination of the brake lights upon pressing the brake pedal.

Is it safe to drive with a brake light switch problem?

No. Should the brake light switch have failed, it is unsafe to drive the vehicle because drivers behind you will have no indication that you are slowing, intend to slow, or are stopped. Always address a failure of this type promptly to ensure your safety while driving.

When replacing the brake light switch keep in mind:

  • The mechanic will test the brake light switch directly to ensure that the issue is not elsewhere in the brake light circuit.
  • Occasionally, the issue is a maladjusted switch or a loose contact, and the mechanic can resolve the problem without switch replacement.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(34)

Rating Summary
31
1
2
0
0
31
1
2
0
0

Eliud

24 years of experience
312 reviews
Eliud
24 years of experience
Chevrolet C1500 V6-4.3L - Brake Light Switch - Winder, Georgia
On site before scheduled time and found part necessary to make repair. Very friendly and knowledgeable. Will use again.

Abdul

12 years of experience
419 reviews
Abdul
12 years of experience
Chevrolet C1500 Suburban V8-5.7L - Brake Light Switch - Decatur, Georgia
Great!

David

11 years of experience
193 reviews
David
11 years of experience
Chevrolet Tahoe V8-5.7L - Brake Light Switch - Philadelphia, Pennsylvania
Dave was courteous and knowledgeable about the problem I had. Was quick in fixing it.

Nathaniel

11 years of experience
327 reviews
Nathaniel
11 years of experience
Chevrolet K1500 Suburban V8-5.7L - Brake Light Switch - Norfolk, Virginia
Great Mechanic. Will book again.

Excellent Rating

(34)

Rating Summary
31
1
2
0
0
31
1
2
0
0
Number of Chevrolet Brake Light Switch Replacement services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Understanding the Audi Service Due and Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Audi Service Due light indicates when your car needs service.
How to Know What Tires to Buy
Your Your vehicle requires traction in order to accelerate, brake efficiently, and maintain control when you are steering. In order to do those things well, you need to own good tires on your vehicle. There are hundreds of different tire...
P0096 OBD-II Trouble Code: Intake Air Temperature Sensor 2 Circuit Range/Performance
P0096 P0096 code definition Intake Air Temperature Sensor 2 Circuit Range/Performance What the P0096 code means P0096 is the OBD-II generic code indicating that the engine control module (ECM) has determined that the intake air temperature sensor 2 (IAT2) is...

Cranks over but won't start

Hi there. Although you indicated that you replaced the crank sensor, it is highly probable that the electrical harness that attaches to the sensor may be the source of your problem. If this wasn't replaces as well, I would start...

Car doesn't move when in gear 2007 Ford Focus

Hello - there are several possibilities here: first, perhaps the shifter cable(s) have broken, or detached themselves from the shifter or transmission, and you're not really in gear (hope for this - this is the least expensive to fix. Second...

Hey there... I have a 2012 Ford Explorer.. the [engine](/topics-engine-ford/) shakes violently when I put it into either reverse or drive (no shake in park or neutral)

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com