Chevrolet R1500 Suburban Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(298)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(298)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Chevrolet R1500 Suburban Car Thermostat Replacement is $208 with $68 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Chevrolet R1500 SuburbanV8-5.7LService typeCar Thermostat ReplacementEstimate$322.74Shop/Dealer Price$368.28 - $496.78
1990 Chevrolet R1500 SuburbanV8-5.7LService typeCar Thermostat ReplacementEstimate$314.97Shop/Dealer Price$359.05 - $487.16
1990 Chevrolet R1500 SuburbanV8-6.2L DieselService typeCar Thermostat ReplacementEstimate$424.81Shop/Dealer Price$496.37 - $706.88
1991 Chevrolet R1500 SuburbanV8-6.2L DieselService typeCar Thermostat ReplacementEstimate$424.81Shop/Dealer Price$496.37 - $706.88
Show example Chevrolet R1500 Suburban Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(298)

Rating Summary
284
5
2
1
6
284
5
2
1
6

Duane

26 years of experience
589 reviews
Duane
26 years of experience
Chevrolet R1500 Suburban V8-5.7L - Car is not starting - Oceanside, California
He was very complete on checking all. under the hood . He gave a good diagnoses .

Duane

26 years of experience
589 reviews
Duane
26 years of experience
Chevrolet R1500 Suburban V8-5.7L - Battery - Oceanside, California
He was very complete and efficient.

Duane

26 years of experience
589 reviews
Duane
26 years of experience
Chevrolet R1500 Suburban V8-5.7L - Tire Rotation - Oceanside, California
He was very effcient and did a good job.

Vladimir

11 years of experience
214 reviews
Vladimir
11 years of experience
Chevrolet Impala V6-3.6L - Thermostat - Elk Grove, California
I was very impressed with Vlad's work. I had an abnormal challenging job, and honestly wondered if he was going to get it done on time. He did! Car is now fixed again and I'm relieved. He cleaned up when he was done and told me about future work that will need to be done. Thank you!

Excellent Rating

(298)

Rating Summary
284
5
2
1
6
284
5
2
1
6
Number of Chevrolet Car Thermostat Replacement services completed
3278+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 BMW X6
The The X6 is a study in identity crises. While the sleek fastback styling and cozy interior suggest a sporty coupe, the hatchback and SUV platform speak to a weak attempt at imitating a wagon (without the roomy passenger capacity)....
How Long Should the Belts in My Car Last?
Automotive Automotive belts these days last quite a bit longer than they once did, thanks to better materials used in the manufacturing process. Just the same, they’re not going to last forever. So if you’re wondering, “How long should belts...
How to Report a Vehicle Break-In
Having Having someone go through the contents of your car and take your personal belongings is a huge violation of your privacy. The act of breaking into a home or vehicle with the intent to commit a crime or theft...

i have a ford ranger 2.2 tdci

Hi there. A check engine or warning light is illuminated after the ECU detects and error coming from sensors or electrical components. This will register an OBD-II trouble code and then illuminate the light on the dash. The only way...

Whirring Noise now WONT start HELP!

From your description, it sounds like the starter motor is not functioning. In attempting to start the engine, if you do not hear the engine turning over, that is there is no starter motor function at all, the starting circuit...

Pulling codes...po206 and po306, cylinder 6 misfire. Changed fuel injectors, fuel injection connectors, spark plugs, ignition coil

Hi Brett. Thanks for contacting us today. Typically, when you've replaced the fuel injectors, plugs and wires, and still getting a single cylinder misfire, it's going to be related somehow to the ECU. Either a trouble code is stuck or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com