Chevrolet Monte Carlo Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(257)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(257)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Chevrolet Monte Carlo Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1972 Chevrolet Monte CarloV8-7.4LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1988 Chevrolet Monte CarloV6-4.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1976 Chevrolet Monte CarloV8-6.6LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1985 Chevrolet Monte CarloV8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1979 Chevrolet Monte CarloV6-3.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1987 Chevrolet Monte CarloV8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1984 Chevrolet Monte CarloV8-5.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2002 Chevrolet Monte CarloV6-3.4LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Monte Carlo Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(257)

Rating Summary
231
10
2
0
14
231
10
2
0
14

Robert

40 years of experience
37 reviews
Robert
40 years of experience
Chevrolet Monte Carlo V6-3.4L - Engine is misfiring - Phoenix, Arizona
On time and explained what was happening and causes ,good job all around, i recommend him

Jose

16 years of experience
324 reviews
Jose
16 years of experience
Chevrolet Monte Carlo V6-3.4L - Brake Light Switch - Fort Lauderdale, Florida
very good. Noticed things tha I wasnt awareof that couldve made a hazardous condition

Jimmy

29 years of experience
186 reviews
Jimmy
29 years of experience
Chevrolet Monte Carlo V6-3.1L - Car is not starting - Charlotte, North Carolina
Jimmy was very helpful and knowledgeable.

Behrak

9 years of experience
321 reviews
Behrak
9 years of experience
Chevrolet Monte Carlo V8-5.0L - Noise from engine or exhaust - Marietta, Georgia
Even though he was 35 minutes late, Behrak was very helpful due to my absence my fiancé was there on my behalf and the whole experience great. He was professional and very helpful

Excellent Rating

(257)

Rating Summary
231
10
2
0
14
231
10
2
0
14
Number of Chevrolet Monte Carlo services completed
2827+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Replace a Control Arm Assembly
The control arms are a mounting point for the wheel and brake assembly. It need to be replaced if damaged or if bushings and ball joints are worn.
How to Replace an Evaporator Temperature Sensor (Switch)
The air conditioning system has an evaporator temperature sensor that fails when there is no cold air or the air conditioning is inconsistent.
How to Replace a Car Kickdown Cable
A car kickdown cable controls what gear the transmission is in. If worn out, it should be replaced to ensure a smooth and efficient drive.

My car has a check engine light and gave codes P2195, P2251, P0170

Based on these fault codes, it sounds like you have an oxygen sensor (https://www.yourmechanic.com/parts/oxygen-sensor) that as failed and it will need to be replaced. The trouble codes will also have to be cleared after the sensor is replaced to see...

Problems with heating with check engine light on

On the 528's, there is an electronically controlled heater valve that can stick closed, blocking heated coolant from entering the heater core. Replacing this component will mean the coolant system would need to drained, filled, and bled. You may want...

Could the power steering pressure sensor cause my steering wheel to be hard or hard to steer?

Hello. The pressure switch (or "sensor") (https://www.yourmechanic.com/services/power-steering-pressure-switch-replacement) on your vehicle supplies a signal to the engine computer to increase engine idle speed as the power steering line pressure increases. If the switch were bad, what you would notice is the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com