Chevrolet LCF 3500 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(86)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(86)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Chevrolet LCF 3500 Power Steering Pressure Hose Replacement is $249 with $109 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Chevrolet LCF 3500V8-6.0LService typePower Steering Pressure Hose ReplacementEstimate$372.80Shop/Dealer Price$430.85 - $596.90
2017 Chevrolet LCF 3500V8-6.0LService typePower Steering Pressure Hose ReplacementEstimate$363.79Shop/Dealer Price$420.07 - $584.80
Show example Chevrolet LCF 3500 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(86)

Rating Summary
78
3
1
2
2
78
3
1
2
2

David

43 years of experience
220 reviews
David
43 years of experience
Chevrolet C1500 V8-5.7L - Power Steering Pressure Hose - Marietta, Georgia

Joseph

34 years of experience
540 reviews
Joseph
34 years of experience
Chevrolet Impala V6-3.5L - Power Steering Pressure Hose - Dallas, Texas
Very professional. He was there on time and Got the job. Walks me through what he needs to fix and how to prevent it from happening on the future. Bottom line, I would recommend him to anyone.

Dameron

18 years of experience
273 reviews
Dameron
18 years of experience
Chevrolet Monte Carlo V6-3.8L - Power Steering Pressure Hose - Indianapolis, Indiana
He did a very good job I would recommend him and the company

Jason

18 years of experience
429 reviews
Jason
18 years of experience
Chevrolet K1500 Suburban V8-5.7L - Power Steering Pressure Hose - Gilroy, California
Jason was great to work with. He explained everything and showed me what he was working on. Great communication and very knowledgeable. I will be requesting Jason again to do future work.

Excellent Rating

(86)

Rating Summary
78
3
1
2
2
78
3
1
2
2
Number of Chevrolet Power Steering Pressure Hose Replacement services completed
946+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P0859 OBD-II Trouble Code: Traction Control Input Signal High
PO859 means that the PCM has reported a malfunction relating to the traction control input signal circuit due to a faulty control switch or sensor.
P0307 OBD-II Trouble Code: Cylinder 7 Misfire Detected
P0307 code definition Cylinder 7 Misfire Detected What the P0307 code means When the P0307 diagnostic trouble code is stored by the...
How to Test Your Alternator
Having your alternator fail can leave you stranded on the side of the road. Though it is not necessary to know every aspect...

I have an error code P0441. It is recommended that I replace the purge control valve. Where is this located and how do I replace?

Hi there. The purge control valve on your vehicle should be behind the engine air filter housing. You may have to remove the air filter housing to get to the purge valve. The valve is held on by a couple...

Car was totaled in frontal crash, airbags did not deploy, why??

This would need to be investigated by an air bag specialist. The system may have been disabled or had faults before the accident happened. I suggest you contact Ford and also a lawyer to investigate the cause. Not all accidents...

Won't start but when it does it dies right away.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com