Chevrolet HHR Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(403)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(403)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Chevrolet HHR Hazard / Turn Signal Flasher Replacement is $229 with $134 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Chevrolet HHRL4-2.4LService typeHazard / Turn Signal Flasher ReplacementEstimate$383.71Shop/Dealer Price$460.89 - $669.93
2008 Chevrolet HHRL4-2.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$363.71Shop/Dealer Price$440.91 - $649.96
2008 Chevrolet HHRL4-2.0L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$363.71Shop/Dealer Price$440.91 - $649.96
2011 Chevrolet HHRL4-2.4LService typeHazard / Turn Signal Flasher ReplacementEstimate$363.71Shop/Dealer Price$440.89 - $649.92
2010 Chevrolet HHRL4-2.4LService typeHazard / Turn Signal Flasher ReplacementEstimate$363.71Shop/Dealer Price$440.92 - $649.99
2009 Chevrolet HHRL4-2.0L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$363.71Shop/Dealer Price$440.91 - $649.96
2011 Chevrolet HHRL4-2.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$368.71Shop/Dealer Price$445.77 - $654.72
2008 Chevrolet HHRL4-2.4LService typeHazard / Turn Signal Flasher ReplacementEstimate$368.71Shop/Dealer Price$446.14 - $655.38
Show example Chevrolet HHR Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(403)

Rating Summary
373
18
4
2
6
373
18
4
2
6

Isai

27 years of experience
230 reviews
Isai
27 years of experience
Chevrolet HHR L4-2.2L - Alternator - San Antonio, Texas
GREAT !

Chris

18 years of experience
492 reviews
Chris
18 years of experience
Chevrolet HHR L4-2.2L - Starter - Missouri City, Texas
Chris was timely and knowledgeable about performing his job duties.

Brandon

20 years of experience
773 reviews
Brandon
20 years of experience
Chevrolet HHR L4-2.2L - Oil Change - Orlando, Florida
Brandon did an awesome job on my oil change. He even called ahead to see if I wanted him to come earlier than my scheduled appointment time which worked out great for me. Would definitely use Brandon again... thank you!

Sidney

14 years of experience
121 reviews
Sidney
14 years of experience
Chevrolet HHR L4-2.4L - Serpentine/Drive Belt - Denver, Colorado
Excellent

Excellent Rating

(403)

Rating Summary
373
18
4
2
6
373
18
4
2
6
Number of Chevrolet HHR services completed
4433+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Slipping Transmission?
The transmission converts the power from the engine into motion so the vehicle can move. Vehicles have either an automatic or manual transmission....
P0179 OBD-II Trouble Code: Fuel Composition Sensor Circuit High Input
P0179 P0179 code definition Fuel Composition Sensor Circuit High Input What the P0179 code means P0179 is a generic OBD-II code that is triggered by high input from the diesel fuel sensor, typically indicating a shorted circuit in the sensor....
P2099 OBD-II Trouble Code: Post Catalyst Fuel Trim System Too Rich Bank 2
P2099 code definition Post catalyst fuel trim system too rich bank 2 What the P2099 code means This trouble code indicates that...

Can I use full synthetic oil in a 99 mercury Sable 3.0dohc

As you may know, there are a multitude of engine oils on the market all claiming to be the "best" and prolonging the life of your car's engine. One of the main questions you will be asked when changing your...

I have a 2000 Dodge Durango my ac compressor went out. Now there is light white smoke coming out the tailpipe. Is it due to the ac

If the refrigerant in the A/C system leaks, that refrigerant can't get into the exhaust system. White smoke in the exhaust is typically due to engine coolant leaking into the combustion chambers and such a leak could be due to...

02 2500 hd Sierra 6.6 lb7 duramax truck won’t start cranks over its getting fuel I replaced cam shaft position sensor and primed fuel and still can’t figure it out

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com