Chevrolet G30 Loud noise when using the clutch Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(23)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(23)

Loud noise when using the clutch Inspection Service

How much does a Loud noise when using the clutch Inspection cost?

On average, the cost for a Chevrolet G30 Loud noise when using the clutch Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1978 Chevrolet G30V8-5.7LService typeLoud noise when using the clutch InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1979 Chevrolet G30L6-4.1LService typeLoud noise when using the clutch InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1980 Chevrolet G30V8-6.6LService typeLoud noise when using the clutch InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 Chevrolet G30V8-5.7LService typeLoud noise when using the clutch InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1977 Chevrolet G30V8-5.7LService typeLoud noise when using the clutch InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1989 Chevrolet G30V6-4.3LService typeLoud noise when using the clutch InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1980 Chevrolet G30V8-5.7LService typeLoud noise when using the clutch InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1990 Chevrolet G30V6-4.3LService typeLoud noise when using the clutch InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet G30 Loud noise when using the clutch Inspection prices

Driving a car with a manual transmission can be a lot of fun. It’s perhaps the most engaged type of driving – connecting you with the car in a very visceral way. However, drivers with manual transmissions face problems that rarely occur for drivers who have an automatic. Clutch wear and tear is one of those (all clutches wear out, and automatic transmissions use them too, but the incidence of wear is less). If you’ve noticed a loud noise when using the clutch, there’s definitely a problem, but it could be one of several different things.

How this system works:

While manual transmissions have become more advanced in the last couple of decades, they’re still simpler to understand than automatics. One of the most easily understood aspects here is how the clutch works. It’s all about friction – and it’s pretty similar to the way your brakes work, too.

When you press the clutch pedal, it engages the clutch to allow you to shift gears. The clutch presses against the flywheel, and the friction material on the clutch stops the transmission from spinning. When you let off the pedal, the clutch disengages, and the transmission is free to spin with the engine.

Operating the clutch requires having working bearings – this applies to both engaging (pressing the pedal in) and disengaging (letting off on the pedal). There are several bearings here as well, including the throw out bearing and pilot bearing.

Common reasons for this to happen:

  • Worn Throw Out Bearing: If you notice the noise from your clutch when you release the pedal, chances are good that the throw out bearing is failing and will need to be replaced.

  • Worn Pilot Bearing: If you notice noise when you press the clutch pedal in, the most likely culprit is the pilot bearing, which will need to be replaced.

  • Worn Release Bearing: Another possible cause of noise when pressing the clutch pedal in is the release bearing. If it’s making noise, then the bearing is failing and will need to be replaced.

  • Worn Clutch: It’s also possible that the clutch itself is worn and will need to be replaced. These are high wear components and need to be replaced on a regular basis. However, the frequency of replacement will depend on your driving style and habits. When replacing the clutch, it may also be necessary to have the flywheel resurfaced.

  • Worn Input Bearing: If the noise happens when the car is in neutral and you are not using the clutch at all, the most likely cause is the input bearing, which is located inside the transmission.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the clutch and transmission operation and verify the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

One of our mechanics will inspect your clutch operation in order to verify the noise and determine the correct course of action. A test drive may be necessary to duplicate the noise. Once the mechanic has ascertained the cause of the problem, a repair can be made.

How important is this service?

If your clutch is making noise during use, it’s more than just an embarrassing annoyance. It’s a sign that there’s something going wrong. The most common problems to fit these symptoms are failed bearings (pilot, throw out and release), but a worn clutch can also cause similar issues. One of our professional mechanics can determine the actual cause of your problem and repair your clutch so you can get back on the road and enjoy peace of mind.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(23)

Rating Summary
22
0
0
0
1
22
0
0
0
1

Paul

33 years of experience
134 reviews
Paul
33 years of experience
Chevrolet G30 V8-5.7L - Check Engine Light is on - Cary, North Carolina
Great mechanic. Totally knew what he was doing.

Robert

20 years of experience
1092 reviews
Robert
20 years of experience
Chevrolet G30 V8-5.7L - Exhaust Gas Recirculation/EGR Valve - Denver, Colorado
Robert was punctual and knowledgeable

Ian

10 years of experience
7 reviews
Ian
10 years of experience
Chevrolet G30 V8-7.4L - Car is not starting - Santa Clara, California
Excellent mechanic - fast, efficient, very knowledgeable.

Chris

18 years of experience
492 reviews
Chris
18 years of experience
Chevrolet G30 V8-5.7L - Starter - Houston, Texas
A true professional

Excellent Rating

(23)

Rating Summary
22
0
0
0
1
22
0
0
0
1
Number of Chevrolet G30 services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Power Steering Fluid Reservoir
Your Your vehicle runs smoothly while you’re driving down the road due to the power steering fluid, making it important to assure that the fluid doesn’t leak. Check your power steering fluid reservoir regularly for cracks and chips and leakage...
How to Test Your Alternator
Having your alternator fail can leave you stranded on the side of the road. Though it is not necessary to know every aspect...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in South Dakota
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in South Dakota through the Universal Technical Institute.

I hear the fuel pump coming on but sometimes it won't start

Just because you hear the fuel pump run does not mean it is pumping the correct pressure to the injection system. If the pressure is real low or the filter is plugged solid, then the pump may not get enough...

Check Engine Light code P2544

The short answer is yes, the tire size can cause the P2544 code (https://www.yourmechanic.com/article/p2544-obd-ii-trouble-code-torque-management-request-input-signal-a-by-conor-fynes). This code sets when the computer sees that the vehicle speed and the requested torque tables in the transmission control module don't coincide. So, a different...

my car is an 04 honda accord 2.4 ivetec.. when i turn off the car and open the door the headlights and taillights flash on and off

Depending on the type of theft system you have and if it is factory installed will dictate the process to set the system light flash when theft system is activated. You may need to have the computer system program set...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com