Chevrolet Equinox Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Chevrolet Equinox Valve Cover Gasket Replacement is $222 with $26 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Chevrolet EquinoxV6-3.4LService typeValve Cover Gasket ReplacementEstimate$823.32Shop/Dealer Price$955.34 - $1334.37
2015 Chevrolet EquinoxL4-2.4LService typeValve Cover Gasket ReplacementEstimate$843.62Shop/Dealer Price$926.27 - $1158.96
2009 Chevrolet EquinoxV6-3.4LService typeValve Cover Gasket ReplacementEstimate$804.40Shop/Dealer Price$932.76 - $1309.05
2020 Chevrolet EquinoxL4-1.5L TurboService typeValve Cover Gasket ReplacementEstimate$636.40Shop/Dealer Price$656.94 - $701.84
2014 Chevrolet EquinoxV6-3.6LService typeValve Cover Gasket ReplacementEstimate$899.34Shop/Dealer Price$1001.46 - $1280.09
2013 Chevrolet EquinoxL4-2.4LService typeValve Cover Gasket ReplacementEstimate$828.12Shop/Dealer Price$907.51 - $1129.02
2012 Chevrolet EquinoxV6-3.0LService typeValve Cover Gasket ReplacementEstimate$1033.90Shop/Dealer Price$1164.27 - $1539.77
2017 Chevrolet EquinoxV6-3.6LService typeValve Cover Gasket ReplacementEstimate$899.34Shop/Dealer Price$996.01 - $1270.55
Show example Chevrolet Equinox Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(4)

Rating Summary
2
1
0
0
1
2
1
0
0
1

Rodney

30 years of experience
574 reviews
Rodney
30 years of experience
Equinox 2006 - Valve Cover Gasket - Sacramento, CA
Rodney did a great job making quite a few repairs to my car. He was very professional and timely! I will use Rodney again in the future!

Joel

9 years of experience
58 reviews
Joel
9 years of experience
Equinox 2018 - Oil Change - Carrollton, TX
Joel provided amazing service and went above and beyond expectations. Would definitely recommend!

Mario

10 years of experience
5 reviews
Mario
10 years of experience
Equinox 2015 - Tire Rotation - Lake Worth, FL
Very professional and engaging. Explained the work that he was going to do as well as future work that would need to be done. Very satisfied.

Mario

10 years of experience
5 reviews
Mario
10 years of experience
Equinox 2015 - Oil Change - Lake Worth, FL
Very professional and engaging. Explained the work that he was going to do as well as future work that would need to be done. Very satisfied.

Excellent Rating

(4)

Rating Summary
2
1
0
0
1
2
1
0
0
1
Number of Chevrolet Equinox Valve Cover Gasket Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 GMC Yukon Hybrid
The The GMC Yukon is about as big and powerful as any SUV can ever get. However, in the past, that also meant paying a large sum every time you hit the pump. GMC has addressed this problem with their...
P0391 OBD-II Trouble Code: Camshaft Position Sensor "B" Circuit Range/Performance (Bank 2)
P0391 code means indicates that the problem is on the side of the engine which does not contain cylinder #1 due to bad sensors, or connectors.
5 Signs Your Car Isn't Shifting Correctly
Improper shifting is a sign of car transmission problems. The solution might be simple or complex, but get it inspected to avoid expensive repairs.

Headlights work intermittently

The headlights work on a high voltage circuit including relays and fuses for over voltage protection. The vehicle may be experiencing faulted relays or the switch that powers the headlight circuit. I recommend having a technician experienced in vehicle electrical...

95 grand Marquis GS

You may have a blower motor with debris that got into it from under dash. It may be paper or other debris that are in the fan blades and will make a rattle slapping noise and can only be cleaned...

Electric power steering code C2219 is coming up on a scanner.

Hi there. The code C2219 is coming up for the computer not able to communicate with the electronic power steering unit. Check all of the wiring from the power steering unit to the computer and make sure that the wires...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com