Chevrolet Epica Ignition Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(45)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(45)

Ignition Switch Replacement Service

How much does a Ignition Switch Replacement cost?

On average, the cost for a Chevrolet Epica Ignition Switch Replacement is $357 with $161 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Chevrolet EpicaL6-2.5LService typeIgnition Switch ReplacementEstimate$539.38Shop/Dealer Price$625.02 - $870.58
2004 Chevrolet EpicaL6-2.5LService typeIgnition Switch ReplacementEstimate$526.77Shop/Dealer Price$609.93 - $853.64
2005 Chevrolet EpicaL6-2.5LService typeIgnition Switch ReplacementEstimate$526.77Shop/Dealer Price$609.96 - $853.70
Show example Chevrolet Epica Ignition Switch Replacement prices

What is the Ignition Switch all about?

The ignition switch, located on the steering column or in the dashboard, takes the power from the battery and directs it to all the accessories and electrical components of your car. It also transfers the power to the starter when you turn the ignition key. If the starter does not receive power from the ignition key, the car will not start. When the ignition switch goes bad, your car may not start and the accessories (lights, radio, etc.) may not work. Replacing an ignition switch can be as simple as removing a few screws to access the ignition switch, or as complicated as removing the whole steering column.

Ignition Switch

Keep in mind:

  • After an ignition switch is replaced, all electrical components should be checked to ensure proper operation.

How it's done:

  • Check the condition of the ignition switch.
  • Remove and replace the ignition switch if it is bad.
  • Verify operation of electrical components.

Our recommendation:

The battery feeds power to ignition switch, so it is important for the ignition system that the battery is in good condition. Don't put too much weight on your key ring because this can damage the key and the tumbler part of the ignition switch. If there is no power inside the car (none of the electrical components are working), have the mechanic inspect the main fuses. If the fuses are good, then the mechanic should inspect the ignition switch and other electrical components.

What common symptoms indicate you may need to replace the Ignition Switch?

  • Car may not start.
  • Car starts then dies.
  • Some electrical components may not work (radio, clock, lights, etc.).

How important is this service?

The ignition switch serves to send power from the battery. When you turn your key to turn on your vehicle, the ignition switch takes power from the battery and sends it to the starter, which allows your vehicle to turn on. When you turn on any electrical components in your vehicle (such as your lights, radio, and air conditioning), the ignition switch draws power from the battery, and sends it to these electrical components to power them. When your ignition switch stops working, your starter and your electrical components have no way of drawing power from your battery. With a faulty ignition switch, you won’t be able to use your radio, lights, or air conditioning, and you won’t be able to turn on your vehicle. In extreme cases, a broken ignition switch won’t allow you to turn your vehicle off, even if you remove the key.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(45)

Rating Summary
39
0
1
1
4
39
0
1
1
4

Tyrone

20 years of experience
105 reviews
Tyrone
20 years of experience
Chevrolet Impala V6-3.4L - Ignition Switch - Houston, Texas

Wesley

14 years of experience
53 reviews
Wesley
14 years of experience
Chevrolet Silverado 1500 V8-5.3L - Ignition Switch Replacement - San Antonio, Texas
I will be using www.yourmechanic.com again.

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
Chevrolet Prizm L4-1.8L - Ignition Switch - Charlotte, North Carolina
Very knowledgeable, explained each problem thoroughly. Such a pleasant guy. I had a great experience with this technician.

Jason

18 years of experience
429 reviews
Jason
18 years of experience
Chevrolet Colorado L4-2.8L - Ignition Switch - Gilroy, California
Jason was by far the best mechanic I have deal with, after a long and frustrating experience he made my experience with your Mechanic a pleasant one he spend almost all day working on my truck and was able to get it fix, thank you Jason.

Excellent Rating

(45)

Rating Summary
39
0
1
1
4
39
0
1
1
4
Number of Chevrolet Ignition Switch Replacement services completed
495+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

On and Off the Road: Parents' Guide to Car Safety
Child protection while driving is a priority for every parent. Convertible car seats have different settings for keeping children safe as they grow.
How to Prepare for the Oklahoma Driver’s Written Test
You You have quite a few things to do before you can take your road test and get your license in Oklahoma. Namely, you need to take and pass the written test so you can get your permit and actually...
How Long Does a Heat Shield Last?
The The heat that is produced by the exhaust system of an engine is much higher than most people realize. With all of the vital and sensitive components that are on your engine, it is important to have the right...

My ac isn't cold enough.

I would not recommend putting refrigerant into a car that you have been told is leaking. refrigerant is damaging to the environment, and the vehicle should be properly inspected for leaks before adding more refrigerant to the system, even if...

if I need brake pads, rotors, and calipers, how long can I wait before I get the calipers? is it ok to just do the pads and rotors

Hello. If you are going to do the brakes then the calipers should be done at the same time. If the calipers are needed and are not done when the brakes are done then you run the risk of having...

Late on oil change leads to loud car

If you ran your engine low on oil it may have damaged the engine and should fill oil and have a mechanic check it to see if it is an engine or exhaust noise?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com