Buick Skylark Clunking or knocking noise from wheels Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(33)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(33)

Clunking or knocking noise from wheels Inspection Service

How much does a Clunking or knocking noise from wheels Inspection cost?

On average, the cost for a Buick Skylark Clunking or knocking noise from wheels Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Buick SkylarkL4-2.5LService typeClunking or knocking noise from wheels InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1995 Buick SkylarkL4-2.3LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1998 Buick SkylarkL4-2.4LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1966 Buick SkylarkV6-3.7LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1975 Buick SkylarkV8-4.3LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1987 Buick SkylarkV6-3.0LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1967 Buick SkylarkV8-6.6LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1986 Buick SkylarkV6-3.0LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Buick Skylark Clunking or knocking noise from wheels Inspection prices

Clunking or knocking noises can be very disconcerting for any driver to hear while they are going down the road. While these noises may be a symptom of some different issues, all are usually related to a suspension component that has failed. When a suspension component has failed, the ride or the vehicle may be altered. If the failed component is not dealt with, it can lead to increasingly difficult and dangerous problems.

How this system works:

Your vehicle’s suspension system is designed to minimize friction between the tires and the road, ensuring a comfortable ride for you and your passengers. Many of the components that may cause a clunking or knocking noise are not only a part of the suspension, but help control the steering of the vehicle. Any issues regarding the steering or suspension of the vehicle should be looked at by a mechanic as they will only become worse over time.

Common reasons for this to happen:

  • Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. If a ball joint is beginning to fail, you may notice a clunking noise coming from the front wheels. This clunking noise will become louder and more frequent over time. You may also notice that your steering has been affected by the bad ball joint, potentially causing vibration in the steering wheel.

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Bad Tie Rods: Tie rods connect a vehicle’s steering rack to the steering arm. This helps translate the turning of the steering wheel to the direction of the tires. When a tie rod end is worn or loose, they may produce a clunking noise. Worn tie rod ends may also cause more play in the steering wheel, making turning more vague.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the clunking or knocking noise from the wheels. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

Telling a mechanic about any unusual sensations, in addition to the clunking or knocking noise, you may have observed, will help him or her understand what went wrong with the vehicle.

The mechanic will begin by lifting the front of the vehicle off the ground and shaking the front tires to check for play. If there is play in the front tires, the mechanic will suspect bad ball joints. The mechanic will then remove the wheel and the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

If the mechanic suspects that the sway bar has gone bad, the mechanic will begin by examining the sway bar bushings. If the entire sway bar appears to be in tact the bushing may cause the clunking noise. The mechanic will then replace the bushings and the sway bar if necessary.

If the mechanic suspects the tie rods, he or she will examine the tie rods for damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

In all repairs, the mechanic will make sure after completing the necessary repairs that the car handles properly. He or she should ask to test drive the vehicle to ensure this.

How important is this service?

Suspension and steering components that have gone bad will only get worse over time. If you notice that your car is not handling well or that it has started producing a clunking or knocking noise, you should have it inspected by a mechanic. Issues with suspension and steering components could also lead to other issues, like prematurely worn tires. Being vigilant about repairs to these components can help ensure long-life for your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(33)

Rating Summary
29
2
0
0
2
29
2
0
0
2

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Buick Skylark V6-3.1L - Battery - Surprise, Arizona
Peter knows what he is foing. He can troubleshoot and remediate very illusive issues.

Duane

25 years of experience
525 reviews
Duane
25 years of experience
Buick Skylark L4-2.5L - Car is stalling - Imperial Beach, California
Duane is a very professional mechanic, it only took about 10 minutes to locate the problem that other mechanics did not find and i would highly recommend him. Thanks so much.

Jim

21 years of experience
42 reviews
Jim
21 years of experience
Buick Skylark L4-2.3L - Coolant is leaking - Pearland, Texas
Arrived early. Knew his stuff and quickly diagnosed the problem. Waiting on a repair estimate and if reasonable would lIke for him to make the repair.

Chris

16 years of experience
419 reviews
Chris
16 years of experience
Buick Skylark V6-3.1L - Tune-up - San Francisco, California
Chris was amazing! Super friendly on time even early! and very knowledgeable and caring!

Excellent Rating

(33)

Rating Summary
29
2
0
0
2
29
2
0
0
2
Number of Buick Skylark services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

Alternator or Car Battery: How to Tell Which Part Is the Problem
When When you need to go somewhere and your car won’t start, it’s not unreasonable to think that you could have a car charging problem. A jump start might fix it in the short term and get you to work...
P0966 OBD-II Trouble Code: Pressure Control Solenoid B Control Circuit Low
P0966 means a problem related to the pressure control solenoid valve which may cause problems shifting gears, harsh upshifts or shock upon upshifting.
The Future of Car Ownership
What does the future of car ownership look like?

Oil leaking from car

Hello, it sounds like you may have a gasket or seal leaking on your car. Smoke in the exhaust could indicate 2 things; you're burning oil or burning coolant. If you're burning oil that usually means your valve seals and...

Does my catalytic converter have a sensor?

Hello, thanks for writing in. You do have a catalyst O2 sensor. The failure of the 15psi test is most likely the catalyst is clogged causing the excessive exhaust back pressure. The catalyst should be replaced if it exceeds the...

Over heating

If you have really found evidence of cooling system blockage(s), then your continued overheating could simply be due to the fact that not all blockages are yet removed. Also, you could have multiple faults, that is blockages plus perhaps a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com