Buick Electra Engine oil is black and gritty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(19)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(19)

Engine oil is black and gritty Inspection Service

How much does a Engine oil is black and gritty Inspection cost?

On average, the cost for a Buick Electra Engine oil is black and gritty Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1977 Buick ElectraV8-6.6LService typeEngine oil is black and gritty InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
1972 Buick ElectraV8-7.5LService typeEngine oil is black and gritty InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1961 Buick ElectraV8-6.6LService typeEngine oil is black and gritty InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1973 Buick ElectraV8-7.5LService typeEngine oil is black and gritty InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
1966 Buick ElectraV8-6.6LService typeEngine oil is black and gritty InspectionEstimate$104.99Shop/Dealer Price$113.42 - $119.75
1967 Buick ElectraV8-7.0LService typeEngine oil is black and gritty InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1976 Buick ElectraV8-5.7LService typeEngine oil is black and gritty InspectionEstimate$124.99Shop/Dealer Price$130.87 - $135.28
1964 Buick ElectraV8-6.6LService typeEngine oil is black and gritty InspectionEstimate$124.99Shop/Dealer Price$131.24 - $135.94
Show example Buick Electra Engine oil is black and gritty Inspection prices

Car engines need oil to operate smoothly and efficiently. Engine oil helps lubricate the dozens of moving and interacting parts, helps prevent rust and corrosion as well as aiding in removing the heat that an engine generates. Modern oil also helps keep an engine clean by removing sludge and build-up. An engine without oil simply will not function.

Brand new engine oil is a lovely amber color but over time it will turn black and in some cases will get gritty. Fortunately, this is usually not a problem, it is simply a result of the oil doing the job it was designed to do.

How this system works:

The primary function of engine oil is to lubricate the various moving parts of an engine. The constant contact between these moving parts generates both heat and wear and tear. Engine oil keeps friction to a minimum and dissipates the heat.

Engine oil is stored in the oil pan. The pan holds between 4 and 6 quarts of oil. When an engine is started, an oil pump sucks the oil from the pan through the pickup tube. The oil then travels to the oil filter, which removes any dirt and debris that has accumulated in it and then sends the oil into the engine via spurt holes. The oil moves through the engine and eventually makes it way back to the oil pan where the process starts again.

Common reasons for this to happen:

  • Normal Wear and Tear: Regardless of how often oil is changed, eventually it becomes black and slightly gritty. This simply means it is doing its job. Modern detergent engine oils which have detergent additives are designed to disperse the tiny particles or engine sludge and hold them in suspension in the oil so they do not build up on engine parts.

This will make the oil darker in color, and slightly gritty but it’s better for the build up to be trapped in the oil then building up on the vehicles engine parts. Oil can only hold so much sludge and eventually it will need to be replaced.

  • Dirty Oil Filter: An oil filter’s primary function is to filter out contaminants in the oil that it picks up while cycling through the engine. Over time an oil filter will become full and will need to be replaced. If it is unable to filter the oil the contaminants will remain in the oil and possibly damage the engine.

  • Overdue for an Oil Change: Oil needs to be changed on a regular basis. While oil turning black and getting slightly gritty is normal, extremely black oil that develops globs on the dipstick needs to be changed immediately. The interval between oil changes will vary depending on the type of oil being used but it is a good idea to follow the manufacturers recommendations.

While 3,000 miles used to be the recommendation, most modern oils, especially synthetics can go between 7,000-10,000 before an oil change is needed.

  • Oil Light Comes On: In most vehicles, if the Oil Warning light comes on, it is reason for immediate concern. In most cases this will indicate a low oil pressure situation, which could be the result of a failing oil pump or a leak. This can do severe damage to the engine. The vehicle should be inspected and repaired immediately.

  • Oil Level is Dropping: If the vehicle is consistently low on oil or the level is dropping sharply over a short period of time, there is probably an oil leak somewhere in the system. An oil leak can lead to a dangerously low amount of oil in the car and should be repaired immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Oil is Black and Gritty issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic look for normal wear and tear of the engine oil, along with the oil filter, oil level and other indications that will help determine if any problem exists or if additional procedures are required in order to provide you with an accurate diagnosis.

How important is this service?

In most cases black and gritty engine oil is normal. Engine oil should be changed on a regular basis according to the manufacturers recommendations. Going too long between oil changes can affect the performance of the engine and lead to expensive repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0

Lee

35 years of experience
66 reviews
Lee
35 years of experience
Buick Electra V8-6.6L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Smyrna, Georgia
Excellent work performed under unusual circumstances.

Andrew

15 years of experience
141 reviews
Andrew
15 years of experience
Buick Electra V8-6.6L - Heater is not working - Puyallup, Washington
He is one of the best mechanics I ever had thanks

Robert

33 years of experience
191 reviews
Robert
33 years of experience
Buick Electra V6-3.8L - Brake Pads Replacement (Front) - Sunnyvale, California
Damn good mechanic. Clearly communicates all issues that even a layman can get it. Courteous and professional!

Vaughan

12 years of experience
92 reviews
Vaughan
12 years of experience
Buick Electra V6-3.8L - Car is not starting - Carrollton, Texas
I wasn't able to meet with him but my mom did and she said he had a very good vibe....

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Buick Electra services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

What Happens to Sensors if They are Dirty?
Car sensors can get dirty with normal use. Symptoms of dirty sensors include reduced engine power, worse gas mileage, or an engine that hesitates.
How to Buy and Sell a Car
Buying Buying a car is the second-largest purchase most people make aside from buying a house. Naturally, with such an expensive transaction, it can be easy to neglect details of the sale or get wrapped up in the emotion and...
P2620 OBD-II Trouble Code: Throttle Position Output Circuit Open
P2620 P2620 code definition Throttle Position Output Circuit Open What the P2620 code means P2620 is an OBD-II code for the engine control module (ECM) detecting the throttle position closed output circuit is open and cannot detect a closed throttle....

Interior lights are on, but car won't start

It sounds like you may have a bad starter (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-starter). Some times starters will go bad intermittently. This is often due to a loose connection of some sort that causes the voltage to be lost in the path from the...

Windshield wiper go to fast and beat hard against the glass.

Hi there. The switch to the wiper system could have a fault causing the wiper arms to move too fast. If you are referring that the wipers are bouncing on the windshield when on the highest setting, then the springs...

My headlights, blinkers, and brake lights work but the taillights, interior lights, and dash lights don't work. All fuses, relays, and switches are good.

Hi there. There is either a break in the wiring on the lighting circuits for the main light switch or the ground wire to the main light switch for the running lights is loose or not hooked up. Check the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com