BMW M550i xDrive Shock Absorber Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Shock Absorber Replacement Service

How much does a Shock Absorber Replacement cost?

On average, the cost for a BMW M550i xDrive Shock Absorber Replacement is $620 with $452 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 BMW M550i xDriveV8-4.4L TurboService typeShock Absorber - Front ReplacementEstimate$1316.38Shop/Dealer Price$1561.12 - $2275.88
2018 BMW M550i xDriveV8-4.4L TurboService typeShock Absorber - Rear ReplacementEstimate$1080.09Shop/Dealer Price$1308.51 - $1988.84
Show example BMW M550i xDrive Shock Absorber Replacement prices

What is the Shock Absorber all about?

Shock absorbers are attached to the vehicle body and suspension components. They are used to absorb road shock, providing a smooth ride. Most cars made after 1995 have shock absorbers in the back wheels and strut assembly in the front. Older cars and trucks may have shock absorbers at all four wheels.

Shock absorbers are basically cylindrical containers filled with gas or liquid. They are mounted from the suspension to the frame of the car. When you drive over a bump, the pistons inside the shocks move up and down against the liquid or gas.

Shock absorbers take a beating day after day, especially on bumpy roads. The gas or liquid will eventually leak, resulting in an unstable or rugged ride. With worn shock absorbers, it is possible that the tires could lose contact with the road and/or wear out prematurely.

Keep in mind:

Shock absorbers are always replaced in pairs (either both front or both rear).

How it's done:

  • Verify that the shock absorbers are bad.
  • Remove and replace the faulty shock absorbers.
  • Inspect the suspension system for any other worn or damaged parts.
  • Test drive vehicle.

Our recommendation:

It is a good practice to replace the shock absorbers every 35,000 miles. You can easily find out if you need new shocks by doing a bounce test. Go to the rear corner of your car and push down on the rear of the car. If your car bounces up and down a few times, it is time to change the shock absorbers.

What common symptoms indicate you may need to replace the Shock Absorber?

  • Unstable, bouncy ride.
  • Tires losing contact with the road.
  • Hard impact when you drive over a bump.
  • Leaking fluid.

How important is this service?

Shock absorbers exist at both rear wheels, and sometimes the front wheels as well. The shock absorbers attach the suspension to the body of your car, and feature pistons that are filled with gas or liquid. As your vehicle rides over the bumps and rough conditions of the road, the suspension is subject to a lot of shock. This shock moves the pistons, but the gas or liquid in the pistons helps absorb the impact, and lessen the shock that is then transferred to the body of the vehicle. As a result, the shock absorbers keep your ride relatively smooth and comfortable.

When the shock absorbers malfunction or leak, they will be unable to absorb any of the shock from the road, and all of the impact on the suspension will be transferred to the body of the car. This not only makes for an uncomfortable ride, but can also cause damage to numerous different components in your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(16)

Rating Summary
14
1
0
1
0
14
1
0
1
0

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
BMW X5 L6-3.0L - Shock Absorber Replacement (Rear) - Chicago, Illinois
Excellent service

Jerome

25 years of experience
415 reviews
Jerome
25 years of experience
BMW X3 L6-3.0L - Shock Absorber Replacement (Rear) - Baltimore, Maryland
Good

Carlos

13 years of experience
77 reviews
Carlos
13 years of experience
BMW 325i L6-3.0L - Shock Absorber Replacement (Rear) - Pico Rivera, California
Extensive knowledge on my vehicle (BMW) and had all the proper tools to perform the job...

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
BMW Z3 L6-2.8L - Shock Absorber Replacement (Rear) - Katy, Texas
Wonderful work and an honest mechanic.

Excellent Rating

(16)

Rating Summary
14
1
0
1
0
14
1
0
1
0
Number of BMW Shock Absorber Replacement services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

Can Sensors Be Cleaned or Do They Need to Be Replaced?
In In most cases, sensors for your automobile will need to be replaced if they fail, but depending on the type of sensor and its location or function, some can be cleaned and reused (https://www.yourmechanic.com/question/can-sensors-be-cleaned-or-do-they-need-to-be-replaced). Sensors can come in many...
The 10 Things to Check in a Pre-Purchase Inspection
A pre-purchase inspection will help you feel assured about a buying a used car. Check warning lights, fluids, tires, suspension, and brakes in a PPI.
How to Replace a Condenser Fan Relay
A condenser fan relay operates the fan that removes heat from the engine. If faulty, it will not allow the A/C to blow cool air or function at all.

the car has suffocation feeling when accelerator is pressed and does not speed constantly

This sounds like a low fuel pressure problem, or an air filter and mass airflow (MAF) sensor problem. Check the fuel pressure and replace the fuel filter first to see if it helps. Next, have the system computer scanned (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection)...

I put a new ignition switch in my 2004 Chrysler Pacifica but it still wont start, how do I program the ignition switch?

Hello. When the ignition switch is replaced in this vehicle it does not need any programming. The switch is a set of internal connections that simply complete circuits. If the vehicle did not start before then the switch is probably...

My harmonic balancer is slipping

The Harmonic balancer has a steel center hub and outer ring that are bonded to a rubber ring that separates them. When the car is very old, the adhesive in the balancer dries up and the outer ring might start...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com