Audi S7 Brake pads are wearing out quickly Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Brake pads are wearing out quickly Inspection Service

How much does a Brake pads are wearing out quickly Inspection cost?

On average, the cost for a Audi S7 Brake pads are wearing out quickly Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Audi S7V8-4.0L TurboService typeBrake pads are wearing out quickly InspectionEstimate$114.99Shop/Dealer Price$139.99 - $158.75
2016 Audi S7V8-4.0L TurboService typeBrake pads are wearing out quickly InspectionEstimate$94.99Shop/Dealer Price$120.04 - $138.82
2013 Audi S7V8-4.0L TurboService typeBrake pads are wearing out quickly InspectionEstimate$94.99Shop/Dealer Price$120.07 - $138.89
2014 Audi S7V8-4.0L TurboService typeBrake pads are wearing out quickly InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
2017 Audi S7V8-4.0L TurboService typeBrake pads are wearing out quickly InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Audi S7 Brake pads are wearing out quickly Inspection prices

Modern disc brakes are far superior to older drum brakes in many ways. They offer better stopping power, and can be equipped with antilock technology to enhance your safety. However, they do have a few drawbacks. One of those is that pads wear out more quickly than shoes (pads are used on disc brakes, while shoes are used with drum brakes). With that being said, if you’re experiencing unusually fast brake pad wear, there could be a problem.

How this system works:

Your brake pads are the point where all the action happens with your system. They’re prone to wear and tear through normal operation. Understanding how disc brakes work isn’t all that hard, and the basics of the system are pretty simple.

A standard disc brake setup consists of a caliper, two brake pads and a rotor (per wheel). Fluid is sent to the caliper from the master cylinder when you press the brake pedal. A piston inside the caliper is activated, and the caliper then squeezes the rotor between the inner and outer brake pad. This slows down your car. It also creates friction, heat and lots of wear on the material of the brake pad.

Over time, brake pads wear out. That’s only natural. You have to replace them periodically. The exact frequency will depend on your driving style and habits. For instance, if you do a lot of stop-and-go driving, you can expect your pads to wear out much faster than a driver who does mostly highway or interstate driving.

With that being said, if you’re noticing abnormally fast brake wear, there could be some issues.

Common reasons for this to happen:

  • Driver Error: The single most common cause of abnormally fast brake wear is driver error. This is most usually seen with “two-footed” drivers who use their right foot to work the gas and their left to work the brake. These drivers tend to leave their left foot resting ever so slightly on the brake pedal. Understand that ANY pressure on the pedal engages the brakes. So, even a small amount of pressure on the corner of the pedal is enough to put the pads in contact with the rotor while the car is moving. This eats through pads very quickly. It’s also generally accompanied by “bluing” of the rotors, which is a sign of overheating.

  • Corroded Slide Pins: The caliper must be able to slide smoothly and evenly at all times. If the slide pins are corroded (most common on old cars, or flood-damaged vehicles), the caliper may not slide out evenly, leaving it sitting slightly off center. This keeps part of the pad in contact with the rotor at all times and will result in premature pad replacement.

  • Abnormal Rotor Wear: In a normal brake system, the surface of the rotor should be smooth, and both sides should be an equal thickness. However, if the rotors are worn, grooved, pitted, burnt or have seen significant wear (and are now in need of replacement), they can create rapid pad wear. It can also cause brake pads to crack, wear strangely (grooving) and other problems.

  • Using Cheap Pads: You’ll find replacement pads available for a wide range of prices, and the natural inclination is often to go for the lower priced option. However, cheap pads generally don’t wear very long. In addition, some very cheap pads can contain chunks of metal that will eat into your rotors. Avoid low-quality pads, even if it means paying a little more.

  • Torn Piston Seal: Pistons are operated by brake fluid, but if the seal is broken, fluid will leak out. Additionally, the piston will not be able to return to its starting position completely, maintaining some degree of contact between the pads and the rotor, accelerating wear significantly.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire braking system, including the seals, pads, rotors, calipers, pistons, slide pins and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will visually inspect the disc brakes to verify both their condition and system operation. This will include the lines, the calipers, the pistons, brake pads, rotors and more. It may be necessary to jack the car up in order to remove the wheels for a full inspection of the system.

How important is this service?

If your brake pads are wearing out prematurely, it can be expensive, frustrating and dangerous. Without reliable brakes, your car is not safe to drive. Your brakes should be inspected during routine maintenance, and you should be aware of their condition at all times. One of our professional mechanics can inspect your brake system and advise you on what needs to be done to repair the issue.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

AL

12 years of experience
234 reviews
AL
12 years of experience
Audi S7 V8-4.0L Turbo - Spark Plugs - Denver, Colorado
Al was extremely friendly and knows exactly what he is doing. Gave me a few pointers to keep an eye on to keep the car running healthy Thank you again!

Engel

23 years of experience
5 reviews
Engel
23 years of experience
Audi S7 V8-4.0L Turbo - Pre-purchase Car Inspection - Arlington, Virginia
Fully explained what he saw of the car in PPI and made me feel confident in the health of the vehicle. Responded in timely manner when I messaged him. Great experience all around.

Nazareth

27 years of experience
276 reviews
Nazareth
27 years of experience
Audi S7 V8-4.0L Turbo - Battery - El Monte, California
Excellent and very professional. Highly recommended!!! Took care of my Audi S7 and solved my problem with the car.

Christopher

10 years of experience
115 reviews
Christopher
10 years of experience
Audi S7 V8-4.0L Turbo - Brake Rotor/Disc Replacement (Front) - Katy, Texas
Friendly and timely.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Audi S7 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Intermittent Wiper Relay
Common signs include the wiper blades only working on one speed or a different speed than you selected, not working at all, and making humming noises.
How to Replace a Lost or Stolen Car Title in Texas
It’s It’s never a great feeling to lose something of importance, or worse yet have it stolen. So what if that item is your car title? Your car title is what proves you are the owner of your vehicle, and...
P0834 OBD-II Trouble Code: Clutch Pedal Switch “B” Circuit Low
P0834 means there is an issue with the clutch position sensor circuit, usually due to a faulty sensor or damaged electrical components.

Glow plug

Hi there. With newer diesel engines and the advanced timing systems they have, the importance of fully functional glow plugs (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-glow-plugs) once the motor is lit is less important. However, as the weather gets colder, starting a diesel engine with...

My car jerks while shifting gears. Will a transmission flush help with this problem?

Hello - some would say not to flush the transmission at this mileage point, for fear of stirring up debris and clogging shift valves. On the other hand, changing the fluid and filter may improve gear engagement (slow as you...

2012 chrysler 200s 3.6l overheats when a/c is on and it pressurizes and be lows it out the overflow relief hose

Hi There, Overheating with the AC on is generally caused by a couple of possibilities. When the AC compressor (https://www.yourmechanic.com/services/ac-compressor-replacement) is beginning to fail, this may incur an increased load on the motor as it works harder than usual to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com