Audi S7 Sportback Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(353)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(353)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Audi S7 Sportback Brake Pad Replacement is $382 with $130 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Audi S7 SportbackV6-2.9L Turbo HybridService typeBrake Pads - Rear ReplacementEstimate$570.96Shop/Dealer Price$643.40 - $844.52
2021 Audi S7 SportbackV6-2.9L Turbo HybridService typeBrake Pads - Front ReplacementEstimate$576.84Shop/Dealer Price$658.66 - $896.68
2020 Audi S7 SportbackV6-2.9L Turbo HybridService typeBrake Pads - Front ReplacementEstimate$523.74Shop/Dealer Price$592.33 - $790.56
2020 Audi S7 SportbackV6-2.9L Turbo HybridService typeBrake Pads - Rear ReplacementEstimate$552.94Shop/Dealer Price$621.90 - $820.40
2022 Audi S7 SportbackV6-2.9L Turbo HybridService typeBrake Pads - Front ReplacementEstimate$576.84Shop/Dealer Price$661.35 - $901.40
2022 Audi S7 SportbackV6-2.9L Turbo HybridService typeBrake Pads - Rear ReplacementEstimate$606.04Shop/Dealer Price$688.55 - $927.09
Show example Audi S7 Sportback Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(353)

Rating Summary
340
10
2
0
1
340
10
2
0
1

Travis

14 years of experience
691 reviews
Travis
14 years of experience
Audi Q5 L4-2.0L Turbo - Brake Pads Replacement (Front) - Minneapolis, Minnesota
Travis was very thorough. Appreciated his attention to detail. Highly recommended.

PETE

23 years of experience
96 reviews
PETE
23 years of experience
Audi A6 Quattro V6-3.0L Turbo - Brake Pads Replacement (Rear) - Newark, Delaware
Pete did a very good job explaining and diagnosing the car

Damian

12 years of experience
465 reviews
Damian
12 years of experience
Audi Q5 V6-3.2L - Brake Pads Replacement (Front, Rear) - Gambrills, Maryland
Damian worked diligently on my car. Also, he arrived before the scheduled time and contacted me to let me know.

Brad

24 years of experience
31 reviews
Brad
24 years of experience
Audi A5 Quattro L4-2.0L Turbo - Brake Pads Replacement (Front) - Midlothian, Virginia
Brad was on time, very friendly, and did great work. We'll be booking him again for future repairs!

Excellent Rating

(353)

Rating Summary
340
10
2
0
1
340
10
2
0
1
Number of Audi Brake Pad Replacement services completed
3883+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

Symptoms of Bad or Failing Interior Door Handles
If a car door will not open or close, feels loose, or takes more effort to pull open, you may need to replace the interior door handle.
The Best Used Cars to Buy If You're a Dog Breeder or Trainer
These These days, dogs are more and more likely to travel with people than ever before. After all, what dog doesn’t ride in a car? As a breeder and trainer though, you’re probably more likely to carry along dogs than...
P0582 OBD-II Trouble Code: Cruise Control Vacuum Control Circuit/Open
P0582 P0582 OBD-II Trouble Code: Cruise Control Vacuum Control Circuit/Open P0582 code definition The P0582 code indicates that there has been a malfunction detected in the cruise control vacuum control circuit by the car’s computer. What the P0582 code means...

Brake fluid leaking

If the vehicle is leaking brake fluid, I would stop driving it, and have it serviced as soon as possible as your braking system is essential to road safety. Braking systems operate using hydraulic pressure, so any leaks are a...

My coolant leaks out as soon as I fill it.

There could be a coolant leak on a coolant hose, the radiator, the reservoir, the heater core, or one or more freeze plugs on your engine. It is best to on a pressure tester on your cooling system and check...

I have a vitz 2003 FL 1.3 automatic it jerks at slow speeds and low revs around 10 - 50 kmh . Also sometimes the gear gets stuck

With a high mileage car like yours, the first thing I think about is whether the scheduled services have been performed. Spark plugs and filters last pretty long, but they should have been changed at least once in your car....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com