Audi e-tron S Grinding noise while shifting Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,467)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,467)

Grinding noise while shifting Inspection Service

How much does a Grinding noise while shifting Inspection cost?

On average, the cost for a Audi e-tron S Grinding noise while shifting Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Audi e-tron SElectricService typeGrinding noise while shifting InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
Show example Audi e-tron S Grinding noise while shifting Inspection prices

The choice between a manual and automatic transmission by a car owner comes down to issues of convenience, fuel economy, and cost. Both transmission choices come with their own set of advantages, disadvantages, and potential issues. Typically, drivers who have a manual transmission are more likely to encounter a grinding noise than drivers with automatic transmissions. On vehicles with a manual transmission, the clutch and gear synchronizers wear out over time, which may lead to a grinding sound or sensation when shifting between gears.

How this system works:

Both manual and automatic transmissions allow a driver to control how much power an engine uses. When driving in a vehicle with a manual transmission, the driver must manually engage the clutch to switch between gears, allowing for more or less power depending on whether the driver shifts up or down. When a driver tries to shift the car without engaging the clutch, the transmission produces a grinding sound. A vehicle may also produce a grinding sound if the clutch has gone bad or if the gear synchronizers have worn out. Automatic transmissions do not require driver interaction to change gears except between forward, backward, and neutral motion. As an automatic transmission ages, the gear changes may not be as smooth and the car make shake in between gears.

Common reasons for this to happen:

  • Forgetting to Engage Clutch: A grinding noise does not always signal an imminent problem. Inexperienced and experienced drivers alike occasionally forget to engage the clutch when shifting. When a driver attempts to shift while the clutch is not engaged, the car produces a grinding noise.

  • Worn out Clutch: Over time, a vehicle’s clutch can wear out causing a grinding noise and sensation. City driving and excessive use can cause the clutch to wear out sooner.

  • Worn out Gear Synchronizers: Gear synchronizers can also wear out over time. Gear synchronizers allows a gear to match speed when engaged to avoid having to “double-clutch” while shifting. The teeth on the synchronizer can wear down, causing a grinding noise when shifting.

  • Chipped Gear Teeth: On vehicles with automatic transmissions, the teeth of each gear may chip over time, making a grinding noise. Usually, when automatic transmissions begin to fail, the driver will notice some hesitation or shaking when the vehicle is shifting gears.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause of the grinding noise. The mechanic will then provide a detailed inspection report outlining the problems with the clutch and transmission including the cost of any repairs that need to be made.

How it's done:

A mechanic will first determine what repair if any needs to be completed. By using a code reader/scanner and checking engine warning lights, the mechanic can get a better idea of specifically what is going on inside your transmission. If the clutch needs to be repaired or replaced, the mechanic will start by removing the vehicle’s transaxle. With the clutch now exposed, the mechanic will inspect the flywheel and clutch to see if there is any damage. The mechanic will then replace the clutch and flywheel if necessary.

If the mechanic suspects the issue may be with the gear synchronizers, the transmission may have to be rebuilt or replaced. With an automatic transmission, the mechanic will inspect and may have to replace the torque converter clutch.

How important is this service?

Any unusual noises coming from your vehicle’s clutch or transmission should be addressed immediately by a mechanic. Paying attention to warning lights and unusual noises can help limit potential damage to your vehicle and may save you money when repairing your vehicle. Letting your mechanic know about any noises or sensations you may have observed could help him or her better identify the problem and begin the necessary repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,467)

Rating Summary
2,288
87
19
12
61
2,288
87
19
12
61

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Audi S5 V8-4.2L - Grinding noise while shifting - Cypress, Texas
While not impossible, it is statistically improbable that any mechanic is better than Maxwell.

Fred

17 years of experience
389 reviews
Fred
17 years of experience
Audi S5 V6-3.0L Turbo - Thermostat - Spring, Texas
What a professional! I was very impressed with Fred's skills, communication, and demeanor. A great experience.

Ruben

17 years of experience
169 reviews
Ruben
17 years of experience
Audi A5 Quattro V6-3.2L - Power door locks are not working - Winston Salem, North Carolina
Great !

Russell

34 years of experience
12 reviews
Russell
34 years of experience
Audi Q5 L4-2.0L Turbo - Oil Change - Frisco, Texas
Great service !!!

Excellent Rating

(2,467)

Rating Summary
2,288
87
19
12
61
2,288
87
19
12
61
Number of Audi services completed
27137+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You Just Got Your License
If If you are a new driver, congratulations on getting your license. Now, you need to think about what type of vehicle to buy. Ideally, you’ll choose a used car that isn’t overly expensive, and is reliable and safe while...
How Long Does a Center Support Bearing Last?
The The center support bearing is normally on mid-size or heavy-duty vehicles, such as trucks. The purpose of this part is to help support the longer drive shaft that these vehicles depend on. The drive shaft is divided into two...
How to Work Out in a Car
If you drive a lot it can be hard to make exercise part of your daily routine. Fortunately there are ways to stretch and get work out while you drive.

Steering wheel makes popping noise

If you hear a popping noise when turning the wheel left, that may be indicative of a problem with the steering or suspension system. I would fist try and locate approximately where the noise is coming from, and then conduct...

ABS light coming on

Your vehicle has a complex ABS system. It is capable of pinpointing the issue itself in most cases. You will need a technician equipped with a high end scan tool to retrieve the faults from the ABS module (https://www.yourmechanic.com/services/abs-light-is-on-inspection) and...

2014 ford fusion service advancetrac message; ads, traction control, skid control and airbag lights lit up all at same time. Is th

ABS, traction and stability control systems rely on input from a number of sensors to function properly. Faults can be in any one of them from the brake light switch (https://www.yourmechanic.com/services/brake-light-switch-replacement), steering angle sensor (https://www.yourmechanic.com/services/steering-angle-sensor-replacement), wheel speed sensor (https://www.yourmechanic.com/services/abs-speed-sensor-replacement), or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com