Audi A5 Quattro Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(106)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(106)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Audi A5 Quattro Car Thermostat Replacement is $236 with $103 for parts and $133 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Audi A5 QuattroL4-2.0L TurboService typeCar Thermostat ReplacementEstimate$688.46Shop/Dealer Price$813.34 - $1022.60
2014 Audi A5 QuattroL4-2.0L TurboService typeCar Thermostat ReplacementEstimate$604.46Shop/Dealer Price$729.47 - $938.83
2010 Audi A5 QuattroV6-3.2LService typeCar Thermostat ReplacementEstimate$652.02Shop/Dealer Price$788.91 - $1033.93
2010 Audi A5 QuattroL4-2.0L TurboService typeCar Thermostat ReplacementEstimate$751.90Shop/Dealer Price$913.60 - $1233.40
2015 Audi A5 QuattroL4-2.0L TurboService typeCar Thermostat ReplacementEstimate$604.46Shop/Dealer Price$729.58 - $939.02
2013 Audi A5 QuattroL4-2.0L TurboService typeCar Thermostat ReplacementEstimate$604.46Shop/Dealer Price$729.46 - $938.81
2009 Audi A5 QuattroV6-3.2LService typeCar Thermostat ReplacementEstimate$679.14Shop/Dealer Price$816.56 - $1065.42
2017 Audi A5 QuattroL4-2.0L TurboService typeCar Thermostat ReplacementEstimate$625.46Shop/Dealer Price$719.90 - $906.33
Show example Audi A5 Quattro Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(106)

Rating Summary
97
5
0
1
3
97
5
0
1
3

Carlos

25 years of experience
122 reviews
Carlos
25 years of experience
Audi A5 Quattro L4-2.0L Turbo - Battery - Walnut Creek, California
Very knowledgeable and friendly. Felt like having an old friend work on my car.

Attila

19 years of experience
906 reviews
Attila
19 years of experience
Audi A5 Quattro L4-2.0L Turbo - Battery - Harrison, New Jersey
Fast and efficient.

Joe

43 years of experience
821 reviews
Joe
43 years of experience
Audi A5 Quattro L4-2.0L Turbo - Brake Pads Replacement (Front, Rear) - Tampa, Florida
.

Joseph

27 years of experience
578 reviews
Joseph
27 years of experience
Audi A5 Quattro L4-2.0L Turbo - Oil Pressure Sensor - Houston, Texas
Highly impressed with Joseph -- he came to my house and changed my 2011 Audi A5 oil pressure sensor -- nice & quick job -- he didn't mind me looking over his shoulder as he did the work -- highly recommend.

Excellent Rating

(106)

Rating Summary
97
5
0
1
3
97
5
0
1
3
Number of Audi A5 Quattro services completed
1166+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

P0117 OBD-II Trouble Code: Engine Coolant Temperature (ECT) Sensor Circuit Low Output Problem
P0117 P0117 code definition Engine Coolant Temperature (ECT) sensor circuit low output problem What the P0117 code means P0117 is the OBD-II generic code that indicates the engine control module (ECM) has seen the ECT sensor output go less than...
How to Get $10 Off YourMechanic.com
Get $10 off YourMechanic services and share $10 coupons with friends with our Give $10, Get $10 Refer-a-Friend program.
P0871 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch C Circuit Range/Performance
P0871 means there is an issue with the transmission fluid pressure, possibly that it is low, the pump is faulty, or the sensor is dirty.

How do I use the express-down windows feature?

Your vehicle’s express-down windows feature allows you to lower the driver and front passenger windows without using both switches. To activate the express-down feature, simply push down the driver’s window switch, then push down again. This will bring your switch...

P0011

Hi there. It sounds like you have a fault in the camshaft position sensor circuit. This fault could be the sensor, the wire harness, the connector, the ECM, or even a mechanical condition. You'll need the manufacturer's specifications for the...

Car shakes when accelerating and has a hard time starting

Shaking or vibration (https://www.yourmechanic.com/services/engine-is-shaking-pulsating-or-vibrating-inspection) may be caused by many different things such as faulty spark plugs, poor fuel pressure or misfires. Other things such as a faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) may cause the engine idle to drop below...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com