Audi 200 Quattro Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,385)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,385)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Audi 200 Quattro Power Steering Pressure Hose Replacement is $691 with $568 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Audi 200 QuattroL5-2.2L TurboService typePower Steering Pressure Hose ReplacementEstimate$1284.81Shop/Dealer Price$1591.39 - $2459.95
1991 Audi 200 QuattroL5-2.2L TurboService typePower Steering Pressure Hose ReplacementEstimate$1258.81Shop/Dealer Price$1565.43 - $2434.02
1990 Audi 200 QuattroL5-2.2L TurboService typePower Steering Pressure Hose ReplacementEstimate$1258.81Shop/Dealer Price$1565.43 - $2434.01
Show example Audi 200 Quattro Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,385)

Rating Summary
2,214
84
19
12
56
2,214
84
19
12
56

David

27 years of experience
182 reviews
David
27 years of experience
Audi A6 Quattro V6-3.2L - Power Steering Pressure Hose - San Mateo, California
Excellent customer service....he called to update me on his schedule and arrival time. Was flexible with my schedule and stayed well past the designated appt. time to finish the entire job.

Kenneth

20 years of experience
775 reviews
Kenneth
20 years of experience
Audi Q7 V6-3.6L - Car is not starting - Los Angeles, California
Kenneth is a very experienced mechanic and i would definitely recommend him to my friends

Brandon

18 years of experience
318 reviews
Brandon
18 years of experience
Audi S4 V6-3.0L Turbo - Brake Pads Replacement (Front) - Durham, North Carolina
On time, great service, explained things well.

Clark

16 years of experience
18 reviews
Clark
16 years of experience
Audi A4 L4-2.0L Turbo - Brake Pads Replacement (Rear) - Portland, Oregon
Punctual. Great service. Expert.

Excellent Rating

(2,385)

Rating Summary
2,214
84
19
12
56
2,214
84
19
12
56
Number of Audi services completed
26235+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How Long Does a Cooling/Radiator Fan Motor Last?
The The cooling/radiator fan motor is part of your vehicle’s cooling system. It transports heat away and dissipates it into the outside air. The fan motor is the part that actually powers the cooling fan. The cooling/radiator fan motor keeps...
How to Replace a Fuel Filler Cap
A good fuel filler cap safely seals the fuel tank. Signs of a failing fuel cap include the smell of gas, stripped threads, or a cracked cap.
How to Replace Fuel Injector O-Rings
Fuel injector o-rings prevent fuel vapors from entering the car engine. O-rings for fuel injectors hold up to 750 psi and keep fuel from igniting.

Sway bar broken

If the sway bar is broken I would recommend having the sway bar and/or sway bar links replaced (https://www.yourmechanic.com/services/stabilizer-bar-links-replacement). The sway bar keeps the vehicle level during turns and prevents either side from dipping in while turning. This improves the...

Loud lifters. No power 2008 Ford Fusion

Hello - the lifter noise and loss of power are, I believe 2 separate issues. The noisy lifter problem (https://www.yourmechanic.com/question/my-truck-has-a-knocking-noise-from-a-bad-lifter) is somewhat common on this engine - sometimes caused by poor oil supply (oil sludging). The loss of power (https://www.yourmechanic.com/question/power-loss)...

Nissan Altima dies when put into gear.

Hi Kristie. Thanks for contacting us today. Typically when you put the car in gear and it stalls, it’s caused by a fuel delivery problem; usually, a defective fuel pump, dirty fuel filters or a fuel filter installed backward in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com