Audi 200 Quattro Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,458)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,458)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Audi 200 Quattro Hazard / Turn Signal Flasher Replacement is $103 with $8 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Audi 200 QuattroL5-2.2L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$130.53Shop/Dealer Price$151.92 - $176.70
1989 Audi 200 QuattroL5-2.2L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$110.53Shop/Dealer Price$131.95 - $156.75
1991 Audi 200 QuattroL5-2.2L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$110.53Shop/Dealer Price$131.95 - $156.75
Show example Audi 200 Quattro Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,458)

Rating Summary
2,279
87
19
12
61
2,279
87
19
12
61

Rodney

36 years of experience
561 reviews
Rodney
36 years of experience
Audi A4 Quattro L4-1.8L Turbo - Oil Pan - Sacramento, California
Rodney was great. Will definitely use him again.

David

36 years of experience
195 reviews
David
36 years of experience
Audi A3 L4-2.0L Turbo - Brake Pads Replacement (Rear) - Pasadena, California
a real pro. explained, went above and beyond and was super fast.

Patrick

15 years of experience
406 reviews
Patrick
15 years of experience
Audi A3 L4-2.0L Turbo - Spark Plugs - Richmond, Virginia
He was on time, provided phenomenal service, and shared great insight about my car. Very polite and professional.

Patrick

7 years of experience
94 reviews
Patrick
7 years of experience
Audi Q5 L4-2.0L Turbo - Car is not starting - Lawrenceville, Georgia
Very professional and got straight on the job

Excellent Rating

(2,458)

Rating Summary
2,279
87
19
12
61
2,279
87
19
12
61
Number of Audi services completed
27038+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How Can I Tell If My Clutch Is Slipping?
For some drivers, shifting a manual transmission is second nature. Others prefer to rely on automatic transmissions. Drivers of automatic vehicles don’t have...
A Buyer’s Guide to the 2012 Toyota Highlander
While While the original Highlander was more of a wagon than an SUV, the 2012 Toyota Highlander is an entirely different beast. It’s large enough to compete with the cargo and passenger capacity of a Honda CR-V, but it’s small...
P2281 OBD-II Trouble Code: Air Leak Between Mass Airflow (MAF) Sensor and Throttle Body
Diagnostic Diagnostic Trouble Code (DTC): P2281 P2281 code definition Air Leak Between Mass Airflow (MAF) Sensor and Throttle Body Related Trouble Codes: P2282 : Air Leak Between Throttle Body and Intake Valves Engine Misfire Codes that may be a symptom...

Passenger's side low beams not working.

Hi there. I have worked on a lot of G6's that have these problems. The headlamp issue is typically always the connection on the light. The terminals become loose or even melt and cause this. This connection needs to be...

Where to buy accessories online?

I did a search for one like that as well and found nothing. However, if you type in mini bowler top hat, and find the hat and size you like. Then search for an antenna ball that's the right size...

After oil change, engine stutters, warning lights on

Hello. EPC stands for electronic power control, and the light is seen when there is a fault with the throttle body, traction control, throttle pedal, or cruise control systems. It is flashing because the car's computer can not compensate for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com