Audi 100 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Audi 100 Control Arm Assembly Replacement is $291 with $109 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Audi 100V6-2.8LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$782.54Shop/Dealer Price$929.50 - $1349.12
1990 Audi 100L5-2.3LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$960.61Shop/Dealer Price$1150.82 - $1710.65
1993 Audi 100V6-2.8LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$436.55Shop/Dealer Price$495.82 - $662.65
1993 Audi 100V6-2.8LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$520.83Shop/Dealer Price$607.81 - $859.26
1991 Audi 100L5-2.3LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$960.61Shop/Dealer Price$1154.75 - $1717.53
1990 Audi 100L5-2.3LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$931.41Shop/Dealer Price$1121.36 - $1680.98
1991 Audi 100L5-2.3LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$960.61Shop/Dealer Price$1150.93 - $1710.83
1990 Audi 100L5-2.3LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$960.61Shop/Dealer Price$1150.89 - $1710.76
Show example Audi 100 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0

Frank

9 years of experience
130 reviews
Frank
9 years of experience
Audi 100 V6-2.8L - Pre-purchase Car Inspection - Chicago, Illinois
Frank was great - kept me informed and performed a solid inspection of a vintage car that I was purchasing 800 miles from home.

Bereketeab

8 years of experience
110 reviews
Bereketeab
8 years of experience
Audi 100 V6-2.8L - Spark Plugs - Sacramento, California
Goes above and beyond, helped save my coil pack when a plug wire was stuck in it. He didn't give up and got it out and finished the job.

Steve

16 years of experience
27 reviews
Steve
16 years of experience
Audi A4 V6-3.0L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Austin, Texas
Steve is TOP NOTCH, seriously. He does great work quickly, shows you what's going on with the car, and makes sure that you're getting a fair deal. I highly recommend Steve for any auto-servicing you need. I'll never go back to a standard shop again.

Luis

5 years of experience
302 reviews
Luis
5 years of experience
Audi Q5 V6-3.2L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Richmond, Virginia
Luis was so great, very knowledgeable and quick. Excellent customer service and I recommend him to anyone. He did great work on my Audi and even pointed out other things that may require future maintenance. Thanks Luis : )

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Audi Control Arm Assembly Replacement services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

Rules of the Road For Rhode Island Drivers
You You might think that if you know the rules of the road for one state, you know them all. However, every state has its own laws and rules for drivers. If you’re planning on driving in Rhode Island soon,...
How Long Do Battery Terminal Ends Last?
A A properly working charging system is an essential part of keeping a car reliable. Each of the components of a charging system has a specific job that it must perform in order for the vehicle to run properly. In...
3 Essential Things to Know About Your Car’s Temperature Gauge
A car temperature gauge shows how hot the engine is. If the temperature gauge reads high, your car could be leaking coolant or have a bad water pump.

P0843

Trouble code P0843 (https://www.yourmechanic.com/article/p0843-obd-ii-trouble-code-transmission-fluid-pressure-sensor-a-circuit-high-by-logan-utsman) pops up quite frequently on vehicles such as your Honda CR-V. The 2nd clutch transmission pressure switch is installed in the hydraulic pressure circuit to the 2nd clutch. The Powertrain Control Module (PCM) uses this information...

Going at 20 km/h or more the front right wheel locks up what can be the cause

Hi there. If this occurred right after an accident, then it may have damaged the wheel speed sensor (https://www.yourmechanic.com/services/wheel-speed-sensor-replacement). If you have the spare tire on the vehicle then this can occur also. Usually when this problem starts happening it...

2009 VW CC won't crank, lights all work do not dim, windows ok, battery is good. No clicking sound. Horn does not beep when locked

The most likely cause of this issue would be the starter motor. Oftentimes the starter motor can fail I'm not cause a clicking sound when the vehicle is being attempted to start. I would recommend having a car will not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com